Supermicro LGA3647-0 (SNK-P0070APS4) 4U Heatsink 140mm fan plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adaptor plate for mounting a 140mm fan instead of the default 92mm one.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v3.0
Adapts a supermicro heatsink to standard 140mm computer fan.
Heatsink model:
https://store.supermicro.com/us_en/4u-active-cpu-cooler-x11-snk-p0070aps4.html
It probably should be larger to increase efficiency, the fan's top portion is close to the wall. However it was impossible to increase the length as it'd collide with the CPU power connector.
Print time is about 5 hours when using 0.14mm layers. Printed it in Creality soy PETG, took about 150 grams. It's designed to be printed with little to no supports, see picture.
EDIT: I removed it because it seems that this doesn't improve CPU temperature in any way, in fact it increases it. Turns out that with the fan that I have it's better to have it right against the heatsink even if the fan is bigger than the heatsink itself.
Maybe this would work if you have a high-speed fan or a fan that has more static pressure than mine. Without the 3D printed plate I get 43 celsius core temperature at idle, whereas with the plate it's 60 celsius.
So before you print anything try to simply clip the fan into the heatsink's original mounts and see if the CPU temperatrue is adequate. You don't need any zip ties, double sided tape or anything, a 140mm or 120mm fan will simply clip into this heatsink without needing to be secured in any way. The side panel of your case should also prevent it from falling off.
Maybe in the future I'll make a new mount without any walls to add some mechanical stability to the fan, or I might just leave it as is.

