1 / 4
Cartographer CNC Mount X End Stop Extension - Multiple Lengths for Trident
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple way to regain the X end stop when you install the cartographer CNC mount on your Trident.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
After the Cartographer CNC mount upgrade, I either needed to move the end stop to the head or make an extension. This is quick and easy. It also gives you an additional 4mm of X travel if desired.
1.25mm offset is the same as the original trident mount. 5.3mm is the maximum without touching the probe. The cad files for the CNC mount are also included.
You can modify the offset at will with the FreeCAD file by changing the offset value in the varsets section - see the pic.