1 / 5
Traxxas Rustler 4x4 Slash 4x4 LCH Chassis Guard, Bash Plate — image 1
1 / 5

Traxxas Rustler 4x4 Slash 4x4 LCH Chassis Guard, Bash Plate

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Durable lightweight skid plate designed for RC vehicle Traxxas Rustler 4x4 LCG chassis underbody protection.

Rating
0 / 5
Likes
1
Downloads
3
Makes
0
Views
31
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — NoDerivatives

Durable lightweight skid plate designed for RC vehicle underbody protection. The design features smooth symmetric contours, countersunk mounting holes, and a fully flat printable top and bottom surface for clean FDM printing and improved bed adhesion.

Optimized for ABS or PLA printing with strong layer bonding and minimal warping.

Key Dimensions

  • Overall height: 270 mm

  • Maximum width: 140 mm

  • Minimum top width: 40 mm

  • Thickness: 2.0 mm (lightweight version)

  • Symmetric left-to-right geometry

  • Smooth curved perimeter contours

  • Flat bottom surface for improved print quality

  • Flat top surface except countersunk hole regions


Mounting Hole Specifications

Top Mounting Holes

  • Quantity: 2

  • Hole diameter: 5 mm

  • Countersunk: Yes

  • Center-to-center spacing: 16 mm

Middle Mounting Holes

  • Quantity: 2

  • Hole diameter: 4 mm

  • Countersunk: No

Bottom Mounting Holes

  • Quantity: 2

  • Hole diameter: 5 mm

  • Countersunk: Yes

  • Center-to-center spacing: 60 mm

  • Hole centers moved upward 5.5 mm from original revision for improved edge strength


Printing Recommendations

Recommended Materials

  • ABS (best for impact resistance and outdoor use)

  • PLA+ (easy printing)

  • PETG (good balance of flexibility and durability)

Recommended Print Settings

  • Layer height: 0.20 mm

  • Walls/perimeters: 4–5

  • Top layers: 6

  • Bottom layers: 6

  • Infill: 30–50% Gyroid or Cubic

  • No supports required

  • Print orientation: Flat on build plate

Recommended Temperatures

PLA+

  • Nozzle: 205–220°C

  • Bed: 55–60°C

ABS

  • Nozzle: 235–250°C

  • Bed: 90–110°C

  • Enclosure recommended


Design Features

  • Fully watertight solid geometry

  • Clean manifold mesh suitable for slicing

  • Optimized for FDM printers

  • Large flat contact area for strong bed adhesion

  • Countersunk holes allow flush hardware mounting

  • Lightweight low-profile design

  • Flexible enough for impact absorption while maintaining stiffness

Tags