1 / 5
Traxxas Rustler 4x4 Slash 4x4 LCH Chassis Guard, Bash Plate — zdjęcie 1
1 / 5

Traxxas Rustler 4x4 Slash 4x4 LCH Chassis Guard, Bash Plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Durable lightweight skid plate designed for RC vehicle Traxxas Rustler 4x4 LCG chassis underbody protection.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
28
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Durable lightweight skid plate designed for RC vehicle underbody protection. The design features smooth symmetric contours, countersunk mounting holes, and a fully flat printable top and bottom surface for clean FDM printing and improved bed adhesion.

Optimized for ABS or PLA printing with strong layer bonding and minimal warping.

Key Dimensions

  • Overall height: 270 mm

  • Maximum width: 140 mm

  • Minimum top width: 40 mm

  • Thickness: 2.0 mm (lightweight version)

  • Symmetric left-to-right geometry

  • Smooth curved perimeter contours

  • Flat bottom surface for improved print quality

  • Flat top surface except countersunk hole regions


Mounting Hole Specifications

Top Mounting Holes

  • Quantity: 2

  • Hole diameter: 5 mm

  • Countersunk: Yes

  • Center-to-center spacing: 16 mm

Middle Mounting Holes

  • Quantity: 2

  • Hole diameter: 4 mm

  • Countersunk: No

Bottom Mounting Holes

  • Quantity: 2

  • Hole diameter: 5 mm

  • Countersunk: Yes

  • Center-to-center spacing: 60 mm

  • Hole centers moved upward 5.5 mm from original revision for improved edge strength


Printing Recommendations

Recommended Materials

  • ABS (best for impact resistance and outdoor use)

  • PLA+ (easy printing)

  • PETG (good balance of flexibility and durability)

Recommended Print Settings

  • Layer height: 0.20 mm

  • Walls/perimeters: 4–5

  • Top layers: 6

  • Bottom layers: 6

  • Infill: 30–50% Gyroid or Cubic

  • No supports required

  • Print orientation: Flat on build plate

Recommended Temperatures

PLA+

  • Nozzle: 205–220°C

  • Bed: 55–60°C

ABS

  • Nozzle: 235–250°C

  • Bed: 90–110°C

  • Enclosure recommended


Design Features

  • Fully watertight solid geometry

  • Clean manifold mesh suitable for slicing

  • Optimized for FDM printers

  • Large flat contact area for strong bed adhesion

  • Countersunk holes allow flush hardware mounting

  • Lightweight low-profile design

  • Flexible enough for impact absorption while maintaining stiffness

Tagi