Bike Crankarm Cap Tool (HEX 10MM!)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
š§ A Shimano TLāFC16 style tool, but for nonāoriginal bolts with a 10mm hex socket.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 57
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons ā Attribution ā Noncommercial
Standard wrenches of this type have a long handle and can be awkward in tight spaces. This smaller key lets you spin the bolt in faster and makes it easier to control final torque. The fit on a 10 mm hex is tight, no slop.
Important during installation:
Remember - before you tighten or loosen the cap, you must first loosen the two M6 bolts.
ā Print settings
Nozzle: 0.4 mm
Layer height: 0.2 mm
Infill: 30% is enough for regular use; 100% gives a heavier, solid feel
Material: PLA, PETG, ASA, ABS
Tested on Ender 3 and Bambu Lab A1.
š Files
.stl.3mfā A1 print profile used in the photo, set for quality.
The key in the photo was printed in Prusament Blood Red.
š² Other tools on my profile: key for the original splineātype cap and a key for replacement caps of original nuts.