Bike Crankarm Cap Tool (HEX 10MM!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
🔧 A Shimano TL‑FC16 style tool, but for non‑original bolts with a 10mm hex socket.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 57
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Standard wrenches of this type have a long handle and can be awkward in tight spaces. This smaller key lets you spin the bolt in faster and makes it easier to control final torque. The fit on a 10 mm hex is tight, no slop.
Important during installation:
Remember - before you tighten or loosen the cap, you must first loosen the two M6 bolts.
✅ Print settings
Nozzle: 0.4 mm
Layer height: 0.2 mm
Infill: 30% is enough for regular use; 100% gives a heavier, solid feel
Material: PLA, PETG, ASA, ABS
Tested on Ender 3 and Bambu Lab A1.
📁 Files
.stl.3mf– A1 print profile used in the photo, set for quality.
The key in the photo was printed in Prusament Blood Red.
🚲 Other tools on my profile: key for the original spline‑type cap and a key for replacement caps of original nuts.