Sword from Breath of the Wild-Easier, no-glue assembly
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The same iconic sword with simpler assembly and no hardware needed.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 20
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
I really liked the sword by T-Spawn, but I felt that the assembly could be improved upon, so I redesigned the way the pieces go together, added battle damage, and reduced the number of main pieces to five, there are ten pieces in total. I also went ahead and made the plaque for the sword as well, using the text from T-Spawn's description.
Printing:
All pieces are in the correct orientation for printing, and do not require supports except for the Hilt Guard, which needs supports on the bottom around the hole in the center. I recommend printing at 25mm/s. These models were made for a printer with a print height of 250mms.
Assembly:
The model can be assembled with no glue, but if you want to play with it (as I do), you should probably add glue for durability. As I have said before, assembly is very simple and easy, the three blade pieces are connected by two identical blade connectors, and the hilt is connected to the blade by a slightly longer connector:

The two Gems go into the holes in the pommel of course.
Post Processing:
I sprayed all the pieces (except the gems) with sand-able filler primer, sanded them, and spray painted them. Then, I wrapped the Handle in leather.
If you have any questions or problems, please let me know!
