WEG Motor Fan 0380.1225
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This 3D model represents a replacement cooling fan designed for WEG electric motors with NEMA 143/5T frame size.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 54
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
WEG Electric Motor Cooling Fan – NEMA 56OS (3D Printable Model)
I have physical part listing on https://ebay.io/m/KUv4Kt
This 3D model represents a replacement cooling fan designed for WEG electric motors with NEMA 56OS frame size. The fan is optimized for FDM 3D printing and intended for maintenance, repair, or prototyping purposes where an original plastic fan is damaged or unavailable.
The part is a radial cooling fan / impeller featuring a circular base plate with integrated structural ribs and evenly spaced outer fins. The geometry provides a balance between airflow efficiency and print strength.
The central hub includes a D-shaft interface, allowing secure mounting on the motor shaft without slipping. Reinforced spokes connect the hub to the outer ring, improving rigidity during rotation.
Key Features:
* NEMA 56OS compatible dimensions
* D-shaft center bore for torque-safe shaft coupling
* Radial blade design for effective airflow
* Integrated structural ribs for durability
* FDM geometry – prints with supports in recommended orientation
* Two-side functional design – flat base with raised internal fins
* Lightweight but rigid construction
Use Case:
* Replacement fan for electric motor cooling
* Industrial maintenance
* Workshop repair solution
* Educational or prototyping applications
Notes:
* Verify shaft size before printing and scale if necessary.
* For high-temperature or continuous operation, use heat-resistant filaments (ABS/ASA/Nylon).
* Balance and alignment are important for high-RPM use.
This model provides a practical and cost-effective solution for restoring airflow and extending the life of compatible electric motors.
3D printing settings
3D printing
0.2mm layer height strong print profile
0.4mm Nozzle
0.6mm Line Width, for better FDM adhesion
Arachne wall generator
100% infill
As motor heats up, require high temperature stiff plastic, thus we make one with PC-CF