Makita metric socket set holder, for portability.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed this to replace the OEM rubber holder as mine were wearing out.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 25
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed to replace the original set holder as mine were wearing out.
Printed out of Sunlu petg, 4 walls, 15% infill. has been holding up for the last couple months of daily use very well.
For assembly you will need an M3x.5 tap, m3 bolt roughly 15mm length or longer, for the hinge point in the latch, tap the smaller diameter hole of the latch before bolting together. you also may want to add a nylock nut on the back to keep it from loosening. An m5x.8 bolt 30mm length for main pivot, and a nylock nut for that. also has holes in the bottom of each slot for m10x2 magnets to be glued in if desired.
Designed for the makita socket set, holds:10mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm, and 21mm. Didn't add a slot for the 8mm as i dont often use it.