FPV Analog Monitor using VR02 Goggles
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Conversion print to turn a pair of VR02 BetaFPV goggles into an analog monitor for portable flying and sharing
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 38
- Makes
- 1
- Views
- 157
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Turn your old VR02 analog FPV goggles into a more portable monitor! This design allows you to take apart the VR02 and squeeze all the guts into a very small footprint (under 130x100x18mm with antenna removed)
The only hardware this requires is the U.FL to SMA connector and an SMA antenna. I opted for an omnidirectional stubby antenna to keep it portable and easy to share with other observers. Screws are re-used from the VR02 and I re-soldered some of the headers to help everything fit tight in the enclosure.
Used U.FL to SMA adapter (non-flanged version): https://www.racedayquads.com/products/sma-pigtail-u-fl-connector-for-vtxs-choose-your-version?variant=31907878600817
Print settings:
Perimeters: 3
Any filament is probably fine but I prefer PETG for anything I take outside.
Hot glue to hold push-buttons in place