1 / 2
Fire extinguisher hook
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
These are a couple of hooks that mount in the vents over the wheel in the trunk of the Hyundai Tucson nx4 to hold a small fire extinguisher. In addition to the hooks some 20mm wide velcro is required.
I printed them in petg (will change to asa if petg doesn't behave) with the following settings:
nozzle: 0.4
layer height: 0.2
wall loops: 5 (this is important)
top/bottom layers: 3
sparse infill: 30% gyroid
supports: none