Skateboard Wedge Riser Pad ~10.5° — Surfskate / Deep Carving | riser3d
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
~10.5° surfskate/carving wedge. Front 14mm/Rear 4mm. Deep pumping motion. PETG 100% infill.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
High-angle ~10.5° wedge riser for surfskate and deep carving. Front 14mm / Rear 4mm geometry dramatically increases lean-to-turn ratio on your front truck, giving you surf-like pumping motion without a special surfskate adapter.
Works great with RKP trucks or any high-angle truck. Run a flat counter-wedge on the rear for maximum surfskate feel, or this wedge on both trucks for aggressive carving.
Features:
Front 14mm / Rear 4mm extreme wedge geometry
- Slot hole pattern for maximum adjustability
- Through-hole bolts (Ø 6mm)
- Laser-engraved riser3d logo
- Designed with riser3d.com
Print Settings:
Material: PETG or ABS | Infill: 100% | Layer height: 0.2mm | Supports: Recommended for thin rear edge | Orientation: Flat side down