Counting matching models…
upd: added the c2 cap Here some woodcarving knife sheaths for BeaverCraft S15 Whittling Wood Carving Kit. The knife included in the kit are: BeaverCraft C2 BeaverCraft C6 BeaverCraft C15 BeaverCraft C16 The sheaths should fit these…
These tools are designed to print fast with no supports, so if you forgot to buy pumpkin carving tools, these might just save the day! They can be scaled generally to any size and should work somewhat well, although I have not tested them…
A collection of‑printed reliefs inspired by traditional woodcarving. Each piece rises softly from the background, capturing quiet emotion and sculptural depth. Clean lines, natural flow, and a calm visual presence create a modern…
A sheath for the DICTUM Hook Knife, Shape AS 26 Product no.: 701748
I created and have used this vise as a cheaper alternative to commercially available ones. It is meant to be easy to assemble, with accessible hardware. Mine has been printed in PLA with 3mm walls and has held up really well. While not as…
It's a goose carving I purchased in Milwaukee. Eventually I got bored and scanned it. It's public domain so use it however you like.
HueForge Stone Carving created for the Polymaker Nature Color Set . Only manual filament swaps required. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used Polymaker Nature Color Set : Panchroma…
This stand can hold 5 Pfeil tools and with the mounting plate can be hooked onto the wall. The holes are made for tools with approximately a 12.8mm diameter collar. The wallplate is intentionally taller to allow for command strips to be…
Tested fits: Flexcut, Beckwith Forge, Drake. Does NOT currently hold OCC palm gouges without wrapping the handles to add radius. All parts tested to fit at 100% size with some post-processing on the receiving holes with a deburring tool…
Vertical chisel holder from MAGG carving chisel set [EAN: 8591715541596] "Magg carving chisel set 12 pcs". Attachment with one SDK 25 screw into OSB or similar. The individual pieces can be joined together with a lock and assembled in…
Skadis Carving knives and blades holder
Carving or Bread knife Holder for Gridfinity 1x8. I have included a one piece file and split files thank you.
FIXED Set of 18 Pumpkin Carving/Cake icing Stencils Easy to Print Each 1 Prints in around 45mins on my P1S. 240mm x 200mm x 1mm
T shank jig saw blade holder with internal blade storage. use two M2 x 12 hex head screws and two M2 hex nuts. Designed for Pumpkin carving but has variety of hobby applications.
This is a holder for T-shank jigsaw blades. It is suitable for blades with thickness from 1 mm to about 2 mm range. All the Bosch jigsaw blades I have fall into this range. I'm publishing this model ahead of Halloween. I hope this can…
Simple little handle to turn your jigsaw blade into a pumpkin carving tool. Just 2 m3 screws and nuts. I haven't printed the one piece handle, but it should work in theory. For a full handle just add two halves to your print bed and…
Print cutty side up Hammer into pumpkin Repeat Enjoy new Jack-O-Lantern
This is how I made it: https://www.instagram.com/reel/DB3rtkrAmC9/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== Using a saw for carving a pumkin can be much easier than using a knife. I designed an ergonomic handle for a t-shank…
Printing Instructions Profile: Any profile should be adequate, though the smaller fangs may benefit from a higher quality setting. Supports Needed: Supports and brim are required for the large fangs, brim only for the small fangs.…
Printed in PLA 0.6mm Nozzle BambuLab A1 Mini 10% infill
Simple tray and case for the PITTSBURGH Stainless Steel Carving Set or the hook & pick set that Harbor Freight sells. I also added slots for 8mm x 2mm magnets for times I leave the tray laying around out of the case. Very since design and…
Router base plate with handles used for when carving patterns using your router. The handles should make it easier to guide your router when doing intricate detail on carving wood. Uses M4 countersunk screws, of which you will need 2 for…
the modell can be printed in 0,2layerheight use scale for your needed size Have Fun
Simple caps designed to be printed with flexible materials. I used overture high speed TPU. May work with pla or petg, but will probably not have enough friction to stay put.
its a High detailed sculped Mirror objekt for 3D milling
Scale to your need Have Fun for more details subdivide and sculp
this is inspired by the original carving tool for dremel, see picture. it is very simple, and require an M6 bolt and nut. You also find a cover for the M6 bolt that can be glued in place Print as you like - no support
This is a cover for wood carving knife with an indent for magnet. The opening is 20mm x 60mm x 4mm. The indent is for the magnet is 12mm diameter and depth of 1.5mm.
My grandparents had a stone bird that they had found. They wanted the original to not be damaged so I came up with this piece for them. They had told me it was an old Native American carving (pictured), but I have not researched it much…
upd: added the c2 cap Here some woodcarving knife sheaths for BeaverCraft S15 Whittling Wood Carving Kit. The knife included in the kit are: BeaverCraft C2 BeaverCraft C6 BeaverCraft C15 BeaverCraft C16 The sheaths should fit these…
I printed this in Mika3d Black Silk PLA and painted it in layers of light gold, gold, metallic black and burnt sienna to get the finished look. There's a hole in the back so you can hang it up on your wall. You should be able to adjust…
There are several designs available: Jack-o-Lantern (classic) Dia De Los Muertos Circle Face Spider Oval Opening Heart Suspension Bridge The candle holder versions will have a space to place a tea light candle. The versions without this…
These tools are designed to print fast with no supports, so if you forgot to buy pumpkin carving tools, these might just save the day! They can be scaled generally to any size and should work somewhat well, although I have not tested them…
Here is a fun little weekend project to get you or your kids into playing with CAD software by making your very own custom designed jack-o'-lantern. To start you’ll need to download a free copy of AutoDesk Fusion for Personal Use, if you…
This model is compatible with the lego system.
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
We caved a Labubu themed pumpkin this year. I made some ears for it. Printed with a colour change on the z axis. I drilled some small holes in the base for the toothpicks. Enjoy, and post some makes if you like them. Thanks
very cool carving for your cnc router depending n cutter BALL 6mm for 4inch Have fun see my other woodcarvings and stuff here
A 3D scanned Buddha stone carving made with Agisoft Metashape for the photogrammetry process using more than 200 pictures to capture the intricate detail of the stone model. The real carving is around one meter tall. Shouldn't need…
testmill on ureol /Hard Foam 100x100 1hr used a R2 Ballnose Have fun to put your writng inside See the other CNC stuff i made g-code by blendercam
nice cnc objekt milled in Cherry wood size is 100x100mm bit used is Ballnose R2 gcode Blendercam THERE are MORE barrel Tops in my account MADE by University students from image
A collection of‑printed reliefs inspired by traditional woodcarving. Each piece rises softly from the background, capturing quiet emotion and sculptural depth. Clean lines, natural flow, and a calm visual presence create a modern…
Makes pumpkin carving easier. Print as large as your printer will allow! Or as small as you like. Many sizes are useful. PLA is AOK. 15% infill is plenty. If PLA, consider a moisture resistant coating such as krylon clear enamel. Use with…
A sheath for the DICTUM Carving Knife, Shape G/K Product no.: 701702
A sheath for the DICTUM Hook Knife, Shape AS 26 Product no.: 701748
I created and have used this vise as a cheaper alternative to commercially available ones. It is meant to be easy to assemble, with accessible hardware. Mine has been printed in PLA with 3mm walls and has held up really well. While not as…
A unique 3D printable creation — this Horizontal Staff Holder With Moon Phase Carvings, Two Cradle Supports Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide…
This is a statue of a man carving a statue. He is carving the bust of a woman and, given your printer's resolution and the size of your print, she can be seen quite clearly. Nice beginning of a strange loop...
Works for the typical wood carving 12pc set you find in dollar shops and on AliExpress. Easy way to store them in a compact form.
It's a goose carving I purchased in Milwaukee. Eventually I got bored and scanned it. It's public domain so use it however you like.
A ~4.2deg wedge riser for cruising and carving. Front 6mm / Rear 2mm geometry increases lean-to-turn ratio on your front truck for fluid, responsive carving. Fits standard 76x54mm baseplates. FEATURES Front 6mm / Rear 2mm wedge (~4.2deg)…
High-angle ~10.5° wedge riser for surfskate and deep carving. Front 14mm / Rear 4mm geometry dramatically increases lean-to-turn ratio on your front truck, giving you surf-like pumping motion without a special surfskate adapter. Works…
Printable handle for a carving knife. Very convenient tool for post-processing 3D prints, which is not all that different from carving wood. Good addition to a deburring tool. Blade My blades were made from blanks about 100mm x 10mm. I…
Replacement for broken knife holder. Thread M6. Printed with PLA. BTW: Cura says that the model is "not watertight". This can be easily repaired with Cura's Mesh Tools (Cura Marketplace) or Meshmixer. (I had the model repaired with…
Replacement latch for Dremel Carving Bit Set 625. Uses the same latch as https://www.thingiverse.com/thing:5165254 and https://www.printables.com/model/187180-irwin-hanson-tap-die-set-sae-drawer-latch . The Flex Latch must be printed in a…
My first revision of a prop for an up and coming Kiwi production "Highway Justice" by Silver Ghost Productions. Ray, let me no if where on the right track and what modifications you'd perhaps like to see introduced into this model, Then…
I took mgg942's piece and did a quick plane cut along the bottom to give a proper face for the piece to stick to the build plate with. Category: Scans & Replicas
I originally designed this canister to hold my Flexcut carving set. But I quite like this model actually and want to use it for a bunch of other things. It's kinda shaped like a chunky peanut butter jar… and will look like one too if you…
I needed a cutting cover for my STUBAI carving knife. This variant was created, it print very easy. I have used TPU Flex Medium 98A. This makes it nice and flexible. Printer : PrusaMk3s Resolution : 0,2mm Supports : No Brim : Yes ( we…
I needed a blade cover for my DASTRAI carving tools. This variant was created, very easy to print. I used TPU Flex Medium 98A. This makes it nice and flexible. Printer : PrusaMk3s Resolution : 0,2mm Supports : No Brim : Yes ( we have thin…
Hunter carving knife from Monster Hunter World. Extras: 2 x #4-40 x 3/8" Bolts from Bolt Depot 2 x #4-40 x 5/8" Bolt from Bolt Depot 1 x Nylon Paracord in Royal Blue from Strapworks Finished Shots Completed Knife Complete Knife 2 Custom…
This is a remix of https://www.thingiverse.com/thing:3272290 I made changes to the sizes so that the sheath fits flush on the knife and added other sheaths for other knifes. BeaverCraft wood carving sheaths. You should rotate the items in…
Update: After testing this print I recommend using a stronger material than normal PLA. As stated before, use a kitchen knife to make initial cuts . You can also scale up on the z axis to make the whole tool thicker. It is plenty sharp…
Halloween pumpkin carving tools The idea of this was born in my mind, when I saw the competition notice. Hopefully many will like it! This can be useful for those who aren't so handy, but they want to make better looking halloween…
Carve details into your jack-o-lantern with this pumpkin carving saw. Intended for detail work - use a metal kitchen knife to make deep rough cuts. An easy print that does not require supports. Curved handle with a hilt protects your…
Model fixed fixed in blender and makeprintable for 3d printing. orig: "Borre Viking - wooden carving (from depth maps)" (https://skfb.ly/6WTqW) by Mario_Wallner is licensed under CC Attribution-NonCommercial-ShareAlike…
This handle is for use with miniature carving chisels like these from Micro-Mark: https://www.micromark.com/Miniature-Chisels-Set-Of-7 I found I wasn't using these chisels as much as I wanted to because of how hard it was to get a good…
V2 version updated added 2/19/2023. Adds a LOT of detail, print comes out much cleaner now.
Pumpkin knife handle for using any T-shank jigsaw blade. There are two halves and a small key that sits in over the blade to keep it secured. One half uses heatset inserts: short #6 32tpi The other half uses 1/2" pan head #6 32tpi pan…
Krishna (/ˈkrɪʃnə/IAST: Kṛṣṇa) is a major deity in Hinduism. He is worshipped as the eighth avatar of the god Vishnu and also as the supreme God in his own right. He is the god of compassion, tenderness, love and is one of the most…
This cover fits the Helvie Chip Carving blade for woodcarving. 9 mm tall x 25.5 mm long. May fit other blades the same length but you can test that out if you need to.
This is a cover for the Hock chip carving knife for woodcarving. May fit other blades sixed 7.75mm x 27mm.
This fits the Hock Chip Carving Stab knife. It may fit other blades that are 13 mm tall and 26 mm long and 1.5 mm thick. I printed it in TPU to make it easy to install and remove and not mar the blade. Print vertically with the slot…
6 Color HueForge model. Aztec carving filament painting made using Sunlu and Esun PLA+ colours. Print at 0.08mm layer heights, 0.16mm first layer. 100% infill (Rectilinear) Filaments Used: Sunlu PLA+ Black Transmission Distance: 0.6 Sunlu…
6 Color HueForge model. Viking Wood carving filament painting made using Sunlu and Esun PLA+ colours. Print at 0.08mm layer heights, 0.16mm first layer. 100% infill (Rectilinear) Filaments Used: Sunlu PLA+ Black Transmission Distance: 0.6…
HueForge Stone Carving created for the Polymaker Nature Color Set . Only manual filament swaps required. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments used Polymaker Nature Color Set : Panchroma…
A cover for the Modified Blade Chip Carving knife from mychicarving.com I like to print these in TPU.
This will fit a knife that is 12mm tall by 93mm long and 1.75mm thick I print these in TPU to make them easier to insert and remove and softer on the blade.
Fits a chip carving knife made by Pfeil or is 36 mm long and 16 mm tall blade is 1.75 mm thick. I print these in TPU for easy install and removal and softer on the blade.
A cover for a 1 3/8 inch long and 3/8 inch tall blade. I print these in TPU to make them softer on the blade.
This stand can hold 5 Pfeil tools and with the mounting plate can be hooked onto the wall. The holes are made for tools with approximately a 12.8mm diameter collar. The wallplate is intentionally taller to allow for command strips to be…
3 simple masks for your pumpkins - make it easy to transfer the designs to the pumpkin and then outline with a pen and cut out. Resize by altering the scale on your slicer plate! Print with tree supports and 0% infill The printed images…
Hueforge print of a Zeus stone carving, with a bit of an optical illusion effect. Total height of the STL is 3.5mm. Print at 0.08mm layer height, with 0.16mm base layer height. Filaments Used: Overture Matte Black Sunlu Grey Overture…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Black Matte PLA+ Brown PLA+ Coffee PLA+ White Swap Instructions: Start with Black Matte At layer #6 (0.56mm) swap to Brown At layer #10…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Black Matte PLA+ Brown PLA+ Grey PLA+ Gold PLA White Swap Instructions: Start with Black Matte At layer #17 (1.44mm) swap to Brown At layer…
Zeus and the Giants This was printed with a 0.2 nozzle, which produces 0.04mm layers a little nicer. It is possible with a 0.4 nozzle, though you will need to have calibrated your printer and filaments very carefully. You can however,…
Keeps a set of 6 handled chisels safely stored and organized in this box. Should fit most chisels that are .9 inches in diameter on the handle or less and 6 inches long. Has a lid to hold them inside when not in use. Box dimensions are 6…
This tool has to be assembled. The bearing is not necessary, but you can use it if you want. For the assembly: Take the “Carving Disc” and insert the bearing. (if you are using one) Then take the “Disc insert” and hammer it in to carving…
Print the wing in two colors. Load wing grey and black together. If you don't have two color printer glue the black part into place. The pins do need to be glued in placed and pushed into the pumpkin. Select your window and scale to the…
These parts are designed to be used to decorate a pumpkin without any cutting! All that is needed is a hole slightly less than 10mm or about 0.39 inches. Then you can press fit the pieces into the pumpkin.
Original art created by us, then we used Hueforge to create this 200x200 piece. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Basic Black PLA BambuLab Basic Blue Gray PLA…
