Stone Carving HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
HueForge Stone Carving created for the Polymaker Nature Color Set. Only manual filament swaps required.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 82
- Makes
- 1
- Views
- 1,369
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
HueForge Stone Carving created for the Polymaker Nature Color Set. Only manual filament swaps required.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments used Polymaker Nature Color Set:
Panchroma Matte PLA Charcoal Black Transmission Distance: 0.3
Polymaker PolyLite PLA Jungle Green Transmission Distance: 0.5
Polymaker PolyLite PLA Lime Green Transmission Distance: 3.5
Swap Instructions:
Start with Matte Charcoal Black
At layer #7 (0.64mm) swap to Matte Army Brown
At layer #8 (0.72mm) swap to PolyLite White
At layer #10 (0.88mm) swap to PolyLite Jungle Green
At layer #12 (1.04mm) swap to PolyLite Lime Green
At layer #17 (1.44mm) swap to PolyLite White for the rest.