1 / 4
221 Series Splicing Connector Opener Tool, Hand Tool — image 1
1 / 4

221 Series Splicing Connector Opener Tool, Hand Tool

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

For 221 Series Splicing Connectors with levers.

Rating
0 / 5
Likes
1
Downloads
5
Makes
0
Views
129
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

For 221 Series Splicing Connectors with levers, this tool provides a way to open the connectors without straining your thumbs. For convenience, you can clip the opener to your belt. Simply slide the front part upwards and insert the connector in the direction indicated. Then press the front part down to open the connector. The connector opens and falls through the opening into your hand. To make clear which way the connector should be opened, we recommend printing the opener in two colors.

Tip: Glossy PLA slides better than matte PLA, so the opener performs better with it. Materials with even lower friction, such as PA, increase durability and make the opener easier to use, but are harder to print with. At first, the opener can be a bit stiff, but with repeated use it becomes easier to operate.

Assembly: Insert the springs into the openings with the arrow pointing upward. They keep the holder and the sliding part together and prevent them from falling apart. To attach the belt clip, you need two small screws (ideally M3x8 countersunk head screws, but M3x6 countersunk head, M3x6 pan head or M3x4 pan head screws are also possible).

  • Recommended material: PA, PLA

  • Color: two-tone

Check out the design on WAGO Creators

Tags