1 / 2
Low-profile 120mm to 140mm radiator fan adapter — image 1
1 / 2

Low-profile 120mm to 140mm radiator fan adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple PC fan adapter, useful for space-constrained AIO mounts

Rating
0 / 5
Likes
1
Downloads
13
Makes
0
Views
59
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Share Alike

I have a 140mm AIO radiator that I wanted to mount to the top of my case, but there was not enough room for a 140mm fan.

I created a very simple low-profile adapter to mount a 120mm fan. It works well, although you do need to remove eight screws if you want to change the fan.

Recommended print settings

  • PETG should be enough if the liquid does not reach 68 °C

  • 0.25mm layer height is fine

Printed with Prusa MK4S / Prusament PETG Matte Black / 0.25mm SPEED.

Note

My cooler is a bit overpowered for my CPU, so the temps never really exceed 60 °C under load, even with a 120mm fan. If yours do, you might need a more thermal-resistant material than PETG.

References

Dimensions taken from the following files.

CAD model attached.

Tags