1 / 2
Low-profile 120mm to 140mm radiator fan adapter — zdjęcie 1
1 / 2

Low-profile 120mm to 140mm radiator fan adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple PC fan adapter, useful for space-constrained AIO mounts

Ocena
0 / 5
Polubienia
1
Pobrania
12
Wydruki
0
Wyświetlenia
58
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

I have a 140mm AIO radiator that I wanted to mount to the top of my case, but there was not enough room for a 140mm fan.

I created a very simple low-profile adapter to mount a 120mm fan. It works well, although you do need to remove eight screws if you want to change the fan.

Recommended print settings

  • PETG should be enough if the liquid does not reach 68 °C

  • 0.25mm layer height is fine

Printed with Prusa MK4S / Prusament PETG Matte Black / 0.25mm SPEED.

Note

My cooler is a bit overpowered for my CPU, so the temps never really exceed 60 °C under load, even with a 120mm fan. If yours do, you might need a more thermal-resistant material than PETG.

References

Dimensions taken from the following files.

CAD model attached.

Tagi