Upside Down Bottle Holder
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.89 – €3.53 net (excluding VAT)
For file: drainer v2_0.2mm_20%_2p_PLA_12.5862m_37.8418g_MK3S_3h21m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.21 excluding VAT (range midpoint).
- Weight reported by the author
- 37 g
- Print time reported by the author
- 3.36 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A holder for a (mostly) empty bottle of dish washing liquid.
- Rating
- 5 / 5
- Likes
- 41
- Downloads
- 173
- Makes
- 1
- Views
- 745
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I made this for my wife. She said when the dish washing liquid bottle gets low, the liquid takes a while to flow down to the nozzle; but this kind of bottle will not stand on its own upside down and she needed to find things to lean the bottle on.
I modeled the idea in clay to get the general dimensions. Then went to Fusion 360 to learn how to "loft". With a little experimenting on the internal wall thickness and bottle lid opening size, this is the result. {By the way, my wife calls it a "volcano". Ha!}
I didn't make it parametric, but if you know your way around in Fusion 360, you should be able to change the design to fit whatever size you need.
Simple default print settings are OK: 20% infill, 0.20mm, 2 perimeters, PLA, no support.