1 / 3
Modern Side table Base
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This was a base that I designed with a peg on the top that also holds the table top with out hardware.
- Rating
- 0 / 5
- Likes
- 50
- Downloads
- 96
- Makes
- 0
- Views
- 904
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This was a Modern Side table I designed that was printed on the Raise 3D Pro2 Plus. You can watch the series on how I built the table below. The Opening for the table top is exactly 76mm, It is friction fit and does not require any glue. If the fit was loose then You can use glue. My top was made from walnut and cut with a shaper origin and also chamfered with a spokeshave. You can use any top you like as well as print with out the peg so you don't have to cut a hole.