Hotshoe adapter for red dot finder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount a red dot finder on your camera
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Public Domain
The model is made from 4 parts. The thumbscrew should be screwed onto the middle part with the raised flange facing towards the foot. The foot, middle and dovetail should then be carefully glued together. The model include location tags to strengthen the joints. Be careful not to get any glue on the thread of either middle part or the thumb screw.
I printed the parts using PETG basic and glued them using 2 part epoxy glue. The threaded parts (middle part and thumb screw should be printed with a layer thickness of 0.1mm. The other parts can be printed with a layer thickness of 0.2mm and 25% infill.
I printed the foot and the dovetail stood on end so that the layers are perpendicular to the clamping force of of the thumb screw and the finder scope clamp.
Once constructed and placed on the camera the thumb screw should be screwed down to grip the top of the hotshoe.