Hotshoe adapter for red dot finder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount a red dot finder on your camera
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Public Domain
The model is made from 4 parts. The thumbscrew should be screwed onto the middle part with the raised flange facing towards the foot. The foot, middle and dovetail should then be carefully glued together. The model include location tags to strengthen the joints. Be careful not to get any glue on the thread of either middle part or the thumb screw.
I printed the parts using PETG basic and glued them using 2 part epoxy glue. The threaded parts (middle part and thumb screw should be printed with a layer thickness of 0.1mm. The other parts can be printed with a layer thickness of 0.2mm and 25% infill.
I printed the foot and the dovetail stood on end so that the layers are perpendicular to the clamping force of of the thumb screw and the finder scope clamp.
Once constructed and placed on the camera the thumb screw should be screwed down to grip the top of the hotshoe.