1 / 7
beer bottle holder for hollywood swing or umbrella — image 1
1 / 7

beer bottle holder for hollywood swing or umbrella

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

this beer bottle holder can be mounted on vertical pipes like on hollywood swings or umbrellas or any other tube

Rating
0 / 5
Likes
5
Downloads
12
Makes
0
Views
69
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

I have restored the old hollywood swing of my grand parents.
After i finished it, my girlfriend mentioned that a beer bottle holder would be a great idea.

So i designed a version, that can be easily mounted on any vertical shaft.
You just need 4 screws and 4 nuts and it will be clamped around the pipe.

The model was measured to fit tubes with an outer diameter of 34mm and bottles with an outer diameter of 70mm.

I printed the holders on my Bambu Lab P1S with the following settings:

Material: PETG-GF from Elegoo in White
Nozzle-Temp: 255°C
Bed-Temp: 70°C (Bambu Lab Textured PEI)
Support: Yes (tree)
Nozzle: 0,4mm
Layer Height: 0,2mm
Infill: 15% (3D Honeycomb)
Wall Loops: 3
Wall Generator: Classic
Bottom and Top Shell Layers: 5
Initial Layer Speed: 50mm/s
Outer Wall Speed: 200mm/s
Inner Wall Speed: 300mm/s
Infill Speed: 270mm/s
Travel Speed: 500mm/s
Fan Speed: 40%
Brim: No

Feel free to scale it matching your needs.

You can use any material, i just wanted to test PETG with glass fibre for the first time and i am impressed by the nice surface / finish.
The layer lines are almost invisible and the holder should be strong enough! :-P

I have added two models.
The first is only the simple model itself.
The second (bbl) is the model including some settings i have used in Bambu Studio.

Mainly i added some modifiers to the holder, to make sure the parts of it surrounding the holes will be printed massively, so i can keep the number of wall loops low but make sure when tighten the screws the holder will be not damaged.

Tags