1 / 2
Earthway 2600A Gearbox Collar
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Is the gearbox on your spreader wandering, affecting the spread pattern? Print a pair of collars to keep it centered!
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 9
- Makes
- 0
- Views
- 129
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print with a UV and chemical resistant filament. I used PETG.
Press in an M4 square-nut and clamp with M4x10mm or M4x15mm Socket Head Cap Screw or Button Head Screw. I used Stainless Steel for both screw and nut.
To install, remove one wheel, slide the axle through the frame and gearbox, and install collars.