1 / 1
DN40 Pipes Camera Rig Feet
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DN40 Camera Rig Feet
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
I needed a rig to get good top down shots for my upcomming projects like the 9mm gantry upgrade on the sovol sv08.
So i quickly came up with the idea to build a camera rig with dn40 pipes.
Here's a video about the whole thing:
BOM:
-2x corner pieces
-2x 87° pieces
-2x DN40 pipe 500mm
-3x DN40 pipe 1000mm
-4x 3d printed feet
Use a handsaw to cut the pipe and a knife to clean up the cuts.
print settings:
anything will work, few walls, little bit of infill
changelog
- 23.05.26 published the model