1 / 3
SolarXiao IPEX Retention Bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple bracket to help retain an IPEX pigtail on a SolarXiao.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 62
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a basic bracket to help retain an IPEX connector pigtail on a SolarXiao. The bracket is sized for M2.5 x 8mm (or 10mm) screws and the coax can route north or west. Spacing is somewhat generous to accomdate thicket coax like rg178 or rg316.
Print in PETG or ASA if using in an outdoors and it's recommende to rotate the model 180 degrees so that the entire bracket is flush with the print bed.