Bedside Table with Construction Bricks
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.52 – €0.63 net (excluding VAT)
For file: test.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.58 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 36.6 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a small bedside table/monitor stand featuring a customizable corner with construction brick adapters
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 21
- Makes
- 0
- Views
- 569
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution
Material
- filament
- 2x wood board (20mm thick, 200mm wide, variable length)
- 8x wood screw
- some construction bricks (LEGOs)
Assembly
Place the two equally long boards onto the 3D printed parts and screw them in place from below. Next: build the missing corner of the table out of construction bricks.
3D Printing
I printed all of these parts lying flat. That requires a print bed of at least 200mm*200mm. Make sure to print the “test” part first to ensure that the bricks fit in well. If not adjust your flow rate accordingly and repeat.
Print files are also available.