VORTEX -- A High Speed RC Pusher Jet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Meet, The Vortex! It is lightly based off of the HobbyKing Radjet, and the Multiplex Funjet. But is 100% designed by me
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 269
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
INCLUDED IS A TEST FILE ONLY, you can download all the files from here: https://cults3d.com/en/3d-model/game/vortex-a-high-speed-rc-pusher-jet
Meet, The Vortex!
It is lightly based off of the HobbyKing Radjet, and the Multiplex Funjet. But is 100% designed by me.
It's got a 750mm Wingspan, and runs off of a 2205 2300kv motor, with a 6x4.5 prop. (unless you're going for speed, in which case you should do some research)
I printed the wings in PolyMaker Grey LW-PLA, and the fuselage in normal Esun PLA. If you're going to use normal PLA, you'll need .4mm walls, with 3% cubic infill. If using LW-PLA, you'll want to use .6 -.8mm walls with 4-5% cubic infill. *PRINT THE FIREWALL AND CANOPY THICKER, with about 20% infill and .8mm walls. The parts will fit on a standard Ender 3.