1 / 6
Lion Sword from Prince Of Persia Warrior Within — image 1
1 / 6

Lion Sword from Prince Of Persia Warrior Within

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Fan art of the Lion Sword from the videogame Prince Of Persia Warrior Within

Rating
0 / 5
Likes
2
Makes
0
Views
68
Reviews
0

Updated at source:

Model information

Category
Props
License
Commercial Use

MODEL
This model is a fan art of the Lion Sword from the videogame Prince Of Persia Warrior Within modeled entirely from scratch using official artworks, concept arts and in-game screenshots as reference, with details and some modifications added for ease of print and use. Fit for cosplay, decoration, faires and actual use if printed per instructions (actual swings but obviously no hits on hard materials).

The sword model comes whole and split in pieces for ease of print. The pieces are all printable on a bed larger than 20 cm, and the sword will be about 100 cm long (75 cm Blade, 25 cm Hilt) once completely assembled.

Detailed instructions are provided in a pdf file with pictures and procedures on how to assemble the printed parts, also found in the manufacturing instructions (without pictures).

You can also see more renders on Artstation: https://www.artstation.com/artwork/98Gd1v

PRINTING ORIENTATION
You can generally print the pieces oriented as they come, but you should consider your end goal.

  • If you want to get a good looking, decorative model, print the blade pieces as they come (vertically): you will get a smoother, easier to print model with no need for supports.

  • If you want to get a robust, usable model, you should orient the blade pieces horizontally along their back: you will get sturdy but harder to print model that will need supports to print.

BLADE JOINING METHODS
The blade is split in pieces joinable in two different methods, named after what you need to use to join the pieces together: Bar and Rod. The pieces split with one method are NOT compatible with the pieces split with the other method. You will need to choose how you want to join the pieces before printing and stick with that method.

METHOD BAR - DESCRIPTION
The file name of the models split with the Bar method all start with “Bar”. The pieces are joined together by printed plastic bars named “Bar Joiners”, bonded to the model by glue for the most part. If your printer is not precise enough you might need to slightly scale the Bar Joiners along their section to adapt to the tolerance.
This method is suitable for a fast joining process and few to none tools usage, but is not suitable to take actual swings with the sword.

METHOD BAR – INSTRUCTIONS
Place the printed pieces in the following order, as showed on the image for reference, and glue them together.
Blade 5 > Bar Joiner 5 > Blade 4 > Bar Joiner 4 > Blade 3 > Bar Joiner 3 > Blade 2 > Bar Joiner 2 > Blade 1 > Bar Joiner 1. Pay attention how you insert the Bar Joiner 1, it must match the holes in Blade 1.
Optionally, you can insert two M4, 10mm screws to better bond the Bar Joiner 1 to the Blade 1. The screws will be later covered up by the Blade-Handle Connector.
You can then slide in the Bar Blade-Handle Connector and then the Handle without glueing them, and instead screw the Bar Joiner 1 to the Handle with two M4, 20 to 25 mm screws.
Then slide the Bar Joiner 6 at the end of the Handle (the screw hole must match). You then slide and glue the Pommel on the Bar Joiner 6.

METHOD ROD - DESCRIPTION
The file name of the models split with the Rod method all start with “Rod”. The pieces are joined together by long metal threaded rods screwed inside the models with a power drill or large pliers.
This method is suitable for a strong and robust joint, letting you take actual swings with the sword, but is the most labour-intensive and you will need a power drill or large pliers and M6 to M8 threaded rods of different lengths.

METHOD ROD – INSTRUCTIONS
You will need six threaded metal rods, as stated in the table. The rods should be slightly shorter than the dimensions (a couple of millimeters) but they MUST NOT be longer, if you don’t want to damage the pieces while joining them. You can buy 1 meter long rods and cut them to length with an angle grinder or as you like.

You then thread every piece by screwing a rod in its hole, making sure the diameter matches the hole. You can use a power drill and tighten a rod in its spindle (like in the image) to drill the plastic piece with it, or you can just use some big pliers if you really want to suffer. This preparation is necessary to manually join the pieces later. When screwing the rod, make sure you unscrew at least two times before getting to the end of the hole, so that you remove the plastic in excess.

Then, after everything is threaded, you follow these steps. Make sure you tighten the pieces together as much as you can as long as you manage to match their surfaces together, as this is the primary way everything stays in place. If you think that a revolution less is loose and can’t do another revolution, consider sanding one or both of the contact surfaces or adding some kind of washer.
1. Screw the Rod M6 18cm into the Blade 5.
2. Screw the Blade 4 on that same Rod.
3. Screw the Rod M8 16cm into the Blade 4.
4. Screw the Blade 3 on that same Rod.
5. Screw the Rod M8 20cm into the Blade 3.
6. Screw the Blade 2 on that same Rod.
7. Screw the Rod M8 20cm into the Blade 2.
8. Screw the Blade 1 on that same Rod.
9. Screw the Rod M8 30cm all the way through the Blade 1 to the Blade 2.
10. Slide the Rod Blade-Handle Connector along that same Rod.
11. Screw the Handle on that same Rod.
12. Screw the Rod M6 5cm into the end of the Handle.
13. Screw the Pommel on that same Rod.

AFTER THE JOINING
Whether you joined the blade with plastic bars or metal rods, consider bonding the pieces further along the separation lines with putty, plastic welding or what you prefer, depending on what is your end goal.

GUARD
The Guard models are the same regardless of what blade joining method you will use. You will need supports to print it. The Guard is split in two halves that you can join together by placing the Guard Joiners in their slot and then glueing both the joiners and the halves together. You can then place the Guard on the blade, matching the holes on it, and just screw it on with two M3 10mm, one M3 18mm and one M3 20mm screws.
All screws should bite into the blade and come out to bite the other side of the guard.

HANDLE
The Handle is best printed as it comes, laying on a flat side. It is modeled smooth so that you can wrap it with leather straps, paracord, cloth of some kind or what you like.
It features holes that you can use to block the plastic bar and / or the metal rod to prevent them from separating (if you are paranoid), and two more holes that you can use to block in place whatever you want to wrap the handle with, if you can’t manage to just tie it traditionally.

POMMEL
The Pommel can be replaced with whatever you want to put there as long as it features a M6 hole at least 2,5 cm long.

Tags