1 / 11
Dongle with 1.3' display for ZMK (monitor version) — image 1
1 / 11

Dongle with 1.3' display for ZMK (monitor version)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Promicro/Nicenano dongle with OLED display 1.3' and reset button. FDM-friendly, no supports required.

Rating
0 / 5
Likes
2
Downloads
12
Makes
0
Views
127
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

This is the case for keyboard dongle with OLED display and reset button. I find it convenient when it is attached to the bottom of the monitor, so it doesn't take the space on the desk and stays within your field of vision.

Hardware required:

  • Promicro/Nicenano nrf52840 controller - 1pcs

  • 1.3 Inch I2C OLED Display Module 4pin (widely available on aliexpress)

  • SMD button 4*4*1.5mm (optional, cut 2 legs and solder it directly to RST and GND pins, as shown on photos)

  • m2 x 6-8mm screws - 2pcs

  • thin wires of your choise

  • piece of double-sided tape

All the parts can be printed without supports. To install display cover, use its flexibility, you have to slightly bend it to snap in place. To attach to monitor just use some double-sided tape.

I have also more "classic" version of this dongle for your desk, so check my other models.