Owala FreeSip Sway Handle
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a removable handle for the 40oz version of the Owala FreeSip Sway
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 40
- Makes
- 0
- Views
- 228
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Want a comfy handle for your Owala FreeSip Sway? You've come to the right place! This is a removable handle for the 40oz version. I made this because I felt the bottle was a little uncomfortable to hold by the indents, but still got the sway instead of the tumbler because I find the bucket handle more comfortable for on the go.
Here is how I printed the handle:
PLA
0.4mm nozzle
0.2mm layer height
3 wall loops
20% infill
No supports
The bottle's weight holds down the handle, but it's still a pretty tight fit, so it won't fall off when setting the bottle down or using the pour spout. However, I highly recommend adding some sort of grippy material on the inside to prevent it from slipping off unintentionally. I recommend putting either electrical tape or smearing a very thin layer of hot glue around the inner ring.
I chamfered all edges for a comfortable grip and to prevent scratching the bottle. However, I'm not an ergonomics expert, and this design may not work for you, so feel free to remix it and post it for others to try! Lmk if you have any questions or requests. Thanks!