1 / 3
Honeycomb Drain Cover for 150mm² drains — image 1
1 / 3

Honeycomb Drain Cover for 150mm² drains

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Drain cover to fit 150mm™ rainwater drains commonly found in the UK

Rating
0 / 5
Likes
11
Downloads
23
Makes
0
Views
80
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I needed a new drain cover after an invasive vine destroyed my old one.

Printed on a Prusa MK4S using recycled PETG, 25% infill and 3 perimeters. Nozzle: stock HF0.4mm. 0.25mm "SPEED" profile. Prints in just under 2 hours. No supports. 

PETG or something that can withstand heat and prolonged periods of sunlight is probably a requirement. 

I've only used standard recycled PETG and today is a particularly hot day - so time will tell. 

The model is reduced in size by 2mm to allow for thermal expansion. The drain I have has a 10mm lip/ledge that the cover sits on - so this reduction in size is fine. I found that it was a snug fit anyway. 

Dimensions: 

x: 148mm
y: 148mm
z: 5mm

Tags