Honeycomb Drain Cover for 150mm² drains
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drain cover to fit 150mm™ rainwater drains commonly found in the UK
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I needed a new drain cover after an invasive vine destroyed my old one.
Printed on a Prusa MK4S using recycled PETG, 25% infill and 3 perimeters. Nozzle: stock HF0.4mm. 0.25mm "SPEED" profile. Prints in just under 2 hours. No supports.
PETG or something that can withstand heat and prolonged periods of sunlight is probably a requirement.
I've only used standard recycled PETG and today is a particularly hot day - so time will tell.
The model is reduced in size by 2mm to allow for thermal expansion. The drain I have has a 10mm lip/ledge that the cover sits on - so this reduction in size is fine. I found that it was a snug fit anyway.
Dimensions:
x: 148mm
y: 148mm
z: 5mm