X-Carve Suckit Dust Shoe Dial Indicator Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wanted a dial indicator mount for my X-Carve that didn't attach permanently and didn't conflict with my SuckIt Dust…
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 16
- Makes
- 0
- Views
- 271
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wanted a dial indicator mount for my X-Carve that didn't attach permanently and didn't conflict with my SuckIt Dust boot. this was designed from scratch and uses 4 neodymium magnets like the SuckIt shoe does so it mounts firmly by simply sliding it in the slot.
The magnets I used are 8mm diameter and 1mm thick and are super glued into the slots for them that align with the magnets in the SuckIt.
A single M4 bolt and nut hold the Dial Indicator to the mount. I designed it to use as little filament as possible and still have a strong structure.
If you need custom size or depth for the magnets let me know I will mod it for you. Although based on the design of the suckit max diameter for the magnet is about 9mm.
Print Settings
Printer:
Maker Select V2
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
20%
Notes:
Print flat on the bottom, it saved with the bottom vertical when I exported it from Fusion 360. Just re-orient in your slicer.
Requirements
4 8mm X 1mm neodymium magnets, 1 M4 Screw or Bolt and 1 M4 Nut and Super Glue.
Designed in Fusion 360.
Category: Other