1 / 3
Rainbow Matchstick clear PETG Diffuser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This rainbow matchstick diffuser prints well using PETG- thicker walls around the screws.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I had the hardest time printing other diffusers in clear PETG because the walls were so thin around the screw hole- so I designed my own with better support in this area.
Printing in clear PETG works!
0.4mm nozzle, 0.2mm layer heights, no supports needed.
(not tested with clear ABS/ASA, but assume it will work fine)
Let me know if it works for you.
