66 models
Printed in PETG for strength but may be usable in PLA. Requires a small elastic band, I used a 1mm thick 40mm diameter band. Fires small safety matchsticks, the attached 3D printable match STLs or similar size projectiles. Ensure you only…
Matchstick Diffuser A diffuser for the Daylight/Rainbow on a Matchstick LEDs BOM Item Qty. M3 Heatset Insert 4 M3x6 BHCS 4 Printing Print one of each main_body_daylight_A.stl and main_body_daylight_B.stl if you have Daylight on a…
— Handle With Care --- Introduction: Discover the thrill of launching matches with precision using my innovative 3D printed matchstick shooter. Crafted for safety and excitement, this print-in-place model guarantees endless fun for…
A like and/or follow costs nothing, just like the 3D model! Thank you 🤗 Repeating Matchstick Gun Full printable functional Toy. It shoots 4 matches quick in a row with Pump action to reload. You need just a rubber band and a piece of…
I have a new AD5x printer and found a 24vdc LED JST-XH port on the main board. I also had a couple of Daylight on a Matchstick pcb lights. I designed some slip in mounts to screw to the PCB lights and snap into the side rails of the…
Key from serial and comics Locke & Key
You should use M3 heat inserts with an height of 3mm heat inserty like these ones: Heat inserts M3x3 OD: 4,6mm
DaylightDiscoRainbow-Stick-Mounts 2020 Mounts for Daylight/Rainbow/Disco on a stick/XXL/Matchstick that has a nice diffuser and looks prettyish... well, better that PCB's bolted to your extrusions V2 update includes design change to use…
This is a remix of chirpy2605's Daylight on a Matchstick LED strip mounts for the Voron v0.x line of printers. The original uses a snap-in design, whereas this remix uses M3 screws and nuts for a more rigid mounting solution. Installation…
I needed a very low profile diffuser for the Daylight on Matchstick LED pcb, so I made this design in a morning. Print settings filament: PETG white or clear layer height: 0.15 for translucency Post Processing Initial design has a bridge…
A remix of the Matchstick Diffusers to fit on to the bed of a Voron V0 (120mm x 120mm). The main body of the diffuser is split into two so they fit on the V0 or similar size bed. For the rest of the BOM, please refer to the original…
30 degree angled Top side mount for Maple Leaf Makers Matchstick diffuser. Placed sideways in the Top hat extrusion of a V0.2 and lights up the area downwards. cables can be tugged away in the extrusions. Use the matchstick diffuser and…
Celebrate Valentines day by shooting these festive arrows with a miniature bow (love spell not included). This small toy bow and arrow is the perfect way to spread Valentines cheer. Shoot people at your own risk. Info on extra arrows below
This is a shielded LED bar mount for Voron 0.2 and likely 0.1 for the affordable “Daylight on a matchstick v2.1 by RZT”. This has an additional switch. Original design can be found here:…
This is an alternative mount for Rainbow on a Matchstick for the V0.1. This mount: Hides the PCB completely Includes a diffuser that can be printed out of natural or white filament Snaps in and out of 1515 extrusions Printing Each of the…
This cover is secured using mounting hardware for the Daylight on a match stick LED. This helps protect from being blinded by the LEDs when looking at print jobs. Update 2025-11-13: Uploaded mounting bracket, I didn't model the Mounting…
Since I replaced the original antennas of the Caddx Vista, I also needed a new mount. So fix measured the antenna and created the mount.
LED diffuser for Rainbow matchstick. Different face thickness versions with thinner(.02) for opaque to thicker(.08) for translucent
There are a number of great diffuser models available, but none worked for my case, so I made my own. This will fit on the Voron v0 on the extrusion just above the gantry. I needed a very low profile to make sure the lights do not touch…
I got the same led bar from Siboor as the creator but I wanted an even stronger diffusion, total height is 4 mm, adding a photo with clearence on my printer, mileage may vary. If the diffuser doesn't sit flush on the pcb you need to snip…
Cut out the striking surface from your existing matchstick box and insert it in the slot. The compartment for the matches is divided so you can have used and fresh ones seperated. Or just fill both sides, you do you!
A clip mount designed to snap into the Voron Zero's 1515 extrusions under the Y rails. The mounts are 160mm in length. A split version of each rail that can be printed on the Zero is included. Hardware needed: 2x 8mm m3 screw 2x m3 nut
Want something more lit? Click here! A tiny object — made giant. The Giant Matchstick turns a simple everyday item into a playful oversized print. It’s a quick, satisfying print and makes a fun desk object, prop, or decoration. Print one…
This is remix of original model, was made to be able printed on Voron 0.2 with print area 120*120. Model needed to rotate 45 degrees on bed in slicer.
made a slight adjustment so the matchstick doesnt hit the z tensioners
Diffuser for the voron v0 Daylight Disco LED-Strips that can be installed in a voron v0.2. Enables better light distribution in the chamber with a more discreet light. Compatible with the mount pins for the 1515 extrusions.
I designed a simple mount for the popular "Matchstick" LED lights for the Voron 0. They mount to the inside of the top rails with 2 M3x6 screws (you can use BH or SH) using M3 nuts. The LED strips themselves should be mounted using 2 M3x6…
Print flat face down, built in supports for recessed screw holes. (Snap off by using allen key and pushing in towards the hole) .2 layer height
Similar to the original but works with generic LED strips instead of the custom PCB. The strips can be up to 14mm wide and is slid in from the back, similar to the diffusor. To mount, choose one of the clips from the original and glue…
This lamp is made from three wooden square sticks (21 × 22 × 330 mm) arranged in a simple tripod structure. Each stick is drilled along its length so the wiring can run inside the wood. A G4 socket with a dimmable red LED is installed at…
Dual antenna mount for the Vannystyle frame. Meant to be used with the Truerc Matchstick 65mm version. .f3d is included so feel free to remix!
Print diffuser from translucent material. I used Fillamentum translucent ABS. Pretty tight fit. Clips can go under or above whatever mount you are using.
Shoot unlit matchsticks across long distances with this small (but powerful) matchstick bow and arrow. All you need is a rubber band and let the fun begin! Please do not aim at humans and light matches at your own risk.
My daylight bar came with a switch sitting in the middle (actually that's not a bad idea because I don't have any spare switchable 24v pinout left), so I remixed bjamdesign's model. It can be easily done in the Slicer, but just in case if…
I adopted the design of the voron 0 matchstick holder from "Shielded mount for 'Daylight' LED stick for Voron0" by @C47_3 to fit to “the 100” printer. There is a mount for each side of the upper gantry. They align nicely with the print…
The Ender 3 to Switchwire conversion from DaRk_dOg has an enclosure which has several corner pieces which also serve as light mounts. I didn't have the proper 60 LED/m strips on hand, but I did have two Daybreak Neo Minis I bought for a…
I wanted to add some better lights to my Sovol Zero but wanted to reuse the holes already in the frame. Each side requires two M3 heat-set inserts. I printed them out of black ASA and they fit on the zero bed. I used these lights:…
I liked Segan's matchstick LED mounts, but I had a pair of the RGB LED strips instead, which have a different mounting hole pattern. I also use Michael Sheldon's PTFE connector mount , which required opening up and moving the PTFE hole in…
Increased the height / distance from tool head to allow for greater clearance. My Dragon Burner with Sherpa Mini had some collision issues with this great PZ Probe Mount . The PZ Probe PCB would contact the LED with the original model.…
Auxiliary fans won't fit with the Matchstick strip, this modification allows fitment for both. Original creation: https://github.com/JackJack3231/V0-Auxilliary-Fan Follow the original guide for installation.
Simple 20-minute print time diffuser without any extra parts. Screw in place using M3x8. Mounted using Maple Leaf Makers clips: https://www.printables.com/model/408214-matchstick-diffusers/files Easily fits the V0 bed when placed at a…
Printable matchstick heads for 25mm square profile section, to create legs. Two type of brace to glue to the legs. First a bowl type, second is a circular ring type. All will print with no supports. Many different configurations can be…
The daylight on a stick version from Alchemy3d (https://alchemy3d.de/products/daylight-on-a-stick-1?variant=503377434708) has a different hole spacing then the standard version and it's not symmetrical. So I made a version for it.…
There are a lot of instructions for making a spring clothespin into a toy "gun" for shooting matchsticks or toothpicks. They work OK, but need some fiddling to get them cocked after shooting--the spring and matchstick often wedge, or the…
Betweener that can mount a daylight on a matchstick. Fits in the K1 riser designed by @JoeCooper_466417 Printed in ABS with no supports, 3 top and bottom layers, 15% Infill. Each betweener will need 2 m3 heat inserts and 2 m3x6 screws. I…
the hole for magnetic 2x5mm . size 64x33x15mm i made this because titanium version so expensive. but this less than $1 :D . please custom this for rubber shield like rugged box ant made it for waterproof matchbox :D
Diffuser for daylight match stick leds. I used these to mount to the 1515 extrusions https://www.printables.com/search/models?ctx=models&q=micron%2B&ordering=popular
I edited the 100 Daylight Edition for the Space Edition version of The 100 printer.
Uses M3 3x4x4.5 / 3x6x4.5 heat inserts for mounting the bracket. The lightbar is mounted at an angle that should hit the nozzle in the center. I've printed it on the side as a tower with variable layer height for the heat insert mounts.…
Use diffusers from ruiqimao's model. I will add that the diffusers did not slide in for me without modification, but I just removed the sidewalls of the diffusers post-print and they slid in a lot more smoothly.
I needed a diffuser/cover for the lights I purchased for my Voron V0.2. I tried a couple models that I found online but none fit like I wanted, so I just designed my own. I printed using clear petg and it worked perfect. Hopefully these…
just mirror the part for other side
Just print as imported.
I'm building my Micron+ and instead of mounting the Rainbow on a Matchstick at a 90° angle I wanted it at a 45° angle with a cover over the top of lights to help focus the beam where I wanted it. Since I made this file for my own…
This is a 1mm thick diffuser for the special Daylight on a Matchstick PCBs sold by Alchemy3D. Works great with mounts like the original ones or: https://github.com/VoronDesign/Voron-Hardware/blob/master/Daylight/STL/Brackets_1515_x2.stl…
Ive seen similar designs that go under the top rails of the frame and require different ptfe tube mounts etc. I didnt like that and I wanted maximum shine from that sweet sweet rgb! SUper easy print use voron settings, 4 walls 5 top and…
I modified the original Rainbow Matchstick mount to suit the Aluminium PCB variant made by Safflower of the Makerbogan aussie group. Diffusers can be obtained from the original model.
Case for Daylight on a Matchstick & Glowstick, based on @CoolBean's original design
I had the hardest time printing other diffusers in clear PETG because the walls were so thin around the screw hole- so I designed my own with better support in this area. Printing in clear PETG works! 0.4mm nozzle, 0.2mm layer heights, no…
The stand has a drain in case it was stored wet.
The popular PCB LED strips are excellent for lighting the small Voron chamber, but when mounted directly they tend to blind anyone trying to watch a print in progress. The baffles I designed prevent this by blocking direct glare when…
SK 🇸🇰 Chýba vám herná zápalka? Tento 3D tlačiteľný model slúži ako univerzálny náhradný diel pre množstvo klasických spoločenských hier. Je vhodný napríklad pre herné kolekcie 150 hier , rôzne cestovné sady aj ďalšie stolové hry, ktoré…
This is a 1mm thick diffuser for the special Daylight on a Matchstick PCBs sold by Alchemy3D. Works great with mounts like the original ones or: https://github.com/VoronDesign/Voron-Hardware/blob/master/Daylight/STL/Brackets_1515_x2.stl…
Ive seen similar designs that go under the top rails of the frame and require different ptfe tube mounts etc. I didnt like that and I wanted maximum shine from that sweet sweet rgb! SUper easy print use voron settings, 4 walls 5 top and…
Celebrate Valentines day by shooting these festive arrows with a miniature bow (love spell not included). This small toy bow and arrow is the perfect way to spread Valentines cheer. Shoot people at your own risk. Info on extra arrows below
This lamp is made from three wooden square sticks (21 × 22 × 330 mm) arranged in a simple tripod structure. Each stick is drilled along its length so the wiring can run inside the wood. A G4 socket with a dimmable red LED is installed at…
