1 / 4
Voron v0 Matchstick Diffuser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Voron v0 Disco on a Matchstick Diffuser
- Rating
- 4 / 5
- Likes
- 17
- Downloads
- 105
- Makes
- 3
- Views
- 644
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
There are a number of great diffuser models available, but none worked for my case, so I made my own.
This will fit on the Voron v0 on the extrusion just above the gantry.
I needed a very low profile to make sure the lights do not touch the moving gantry.
I also wanted it thick enough to soften the lights.
This will print on the v0 as long as you rotate 45 degrees.
This is based on the board you can get on Aliexpress: LINK
I used this mounting hardware model: LINK
I uploaded my model in case anyone else needs a slight change.