Tineco Vacuum mount for Ikea Skadis with T-Nuts
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tineco Vacuum mount for Ikea Skadis with T-Nuts
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 46
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I've attached 2 versions of the Tineco holder. The longer version is similar in length of the original mount on which the vacuum is mounted. The shorter mount uses less space from the Skadis system optimizing space and filament use and increase print speed. The shorter one also has 2 clip mounts, one facing forward and one facing back in case you want to mount the part facing the other direction.
No supports are needed to print this. I used regular PLA and it is plenty strong and is practically invisible once your accessories are mounted.
I've taken screenshots of the print settings I used in OrcaSlicer for the objects to give added strength to the edges. For most parts, this is not needed but for the heavier part like the roller, this will improve the strength of the part.
In addition, I made the following changes to the design posted by @heiko
Uses T-Nuts.
It mounts using the SKÅDIS T‑nut system. You can find the T‑nut print files here: https://www.printables.com/model/228663-skadis-t-nuts-mounting-system-for-ikea-skadis-pegb
Both M2.5 and M3 mounting options work. I prefer the M3 version for added sturdiness. The mounting hole supports either size, as long as your M2.5 screw has a head smaller than 3.2 mm. With M3 screws, the hole may form light threads in the printed part, but you can easily strip them by turning the screw with a bit of leverage.
I am using the this t-nut for my installation
https://www.printables.com/model/273165-direct-screw-in-t-nuts-for-ikea-skadis-pegboards
Uses 2 objects for added strength
The part uses 2 objects in the 3MF file. This allow standard print details for the main body but reinforces the mount by using a 2nd object around the edge. For object 2, I recommend using 4 wall loops with alternate wall setup. Also import the 3MF file as 1 part with multiple objects so it is printed a 1 part.
Multiple Orientations for install
The design allows for multiple ways to install the mount. It can be installed facing up, down or to the side if needed. Using 3 screws allows for full flexibility on how you want to install the mount.
Another design element is that you can print 2 and connect them together to have them back to back so you can mount 2 accessories in a smaller footprint.
Use less filament
The 2 object design allows for less filament use on its own. In addition, I have reduced the footprint of this mount to overall keep strength of these parts but reduce the amount of filament consumed as well as improve print times.
