Counting matching models…
This Switch is a replacement for a broken seesaw switch which connects the different accessories to the vacuum cleaner. Tested for a Tineco S11, may fit on different models too ;-) Depending on the wear of your vacuum cleaner it may need…
This is a replacement for the spring-loaded latch that goes on the extension tube of the Tineco A10 (or A11) Hero vacuum cleaner. I have had two of them break, so I think it's a design issue with the original. This part is a direct…
This is a remix of @ArieH pegboard clips designed for an IKEA Skadis board here. The Tineco Pure S12 Plus comes with a multitude of accessories to cover just about any vacuuming challenge. They also supply a bag, for the accessories that…
A simple and strong wall holder for the spare Tineco brush that holds the brush at one angle. The model should be printed standing up (like the picture) with the help of a brim, no support is needed :) Print settings (suggestions) Print…
I couldn't find one to print and you can only buy the dustbin and lid from Aliexpress. Now you can print your own replacement lid. Use the original seal that came with the dust bin lid.
The original concept was a crevice tool long enough to reach the bottom of the clothes dryer's lint filter slot. I found, I'm now using this more than Tineco's crevice tool for general cleaning around the house. Printing Printed in PLA…
Small spare wheel for vacuum cleaner foot Tineco A11 Hero to replace the old damaged ones. Printed with Extrudr PETG hellfire red with 0,4mm nozzle and 0,12mm layer height. TPU would certainly be better. Maybe it also fits on other…
Tineco Pure One X dustbin cover
we recently bought the Tineco cordless vacuum clear and it came with so much additional accessories, that there was not enough space to put all of the onto the included wall mount. so i created the holder to screw it to our workbench…
Drying rack to hold the parts of my Tineco FLOOR ONE S5 Team. Snaps into the original base that comes with the Tineco. Lets everything airdry properly instead of getting musty and stale. Not sure of other Tineco's share the same base as…
Wall mount for Tineco A10 based of nicedevil007's wallmount with added rigid support on the topside for added rigidity.
Designed as a starting point for 3D printed attachments for the Tineco A10 stick vacuum (and likely other Tineco models). Instead of a mechanical spring latch as on some of the OEM attachments, this uses a print-in-place mechanism that…
The black rubber lip on the suction opening has unfortunately fallen off. This is a replacement cap that should be printed in TPU.
A small funnel to make filling the clean water tank easier and less messy
I've attached 2 versions of the Tineco holder. The longer version is similar in length of the original mount on which the vacuum is mounted. The shorter mount uses less space from the Skadis system optimizing space and filament use and…
This is a replacement piece that connects the extension wand to the vacuum. My vacuum model is A11 Master but I think it will work on any other vacuum that uses the same wand/piece. There is space for the 2 pin connector. Latch details…
Da beim Tineco Floor One S6 einiges an Zubehör mitgeliefert wird, habe ich dafür einen Halter konstruiert. Dieser kann hingestellt oder an der Wand aufgehängt werden (2 Bohrlöcher für 6er Schrauben sind vorhanden). Der Halter trägt: die…
The original concept was a crevice tool long enough to reach the bottom of the clothes dryer's lint filter slot. I found, I'm now using this more than Tineco's crevice tool for general cleaning around the house. Printing Printed in PLA…
The holders work with A10, Pure S12, and One S70 models, and probably brushes for many other Tineco models.
A small funnel to make filling the clean water tank easier and less messy
This is a super strong, simple model that mounts to the wall and holds vacuum tools/accessories. I built it for the tools that fit my Miele and Tineco, and it fits smaller tools for my Festool shop vacuum as well. It should work with any…
Der Adapter passt z.B. für Tineco A30s. Für die Variante mit Rastfunktion wird noch eine Druckfeder mit Außendurchmesser kleiner 10 mm und Innendurchmesser größer 7 mm, hier müsst ihr testen, was funktioniert, hatte hier noch eine…
This is a replacement for the black latch on Tineco Pure ONE S11; on mine, the nubs broke off so the latch would not stay. I recommend printing in PETG for strength. You may want to cut off the nubs before you do your first trial fitting,…
My first thing I publish. My vacuum has fallen and the motor do not stand anymore on the vacuum waste tank. I did a straightjacket to keep them closely together and don't split any time I move. I printed it in PETG 0.2mm 25%infill 5walls…
This attachment connects a half-inch inner diameter hose to the Tineco A10 stick vacuum (and likely other Tineco models) and provides a print-in-place twist mechanism for adjusting the suction. Prints without support. The twist suction…
This screen fits against the dirty water tank on a Tineco S5, to catch larger particles before they fall down the drain. You can remove the grime with a paper towel and throw it in the trash. Print settings: 2 walls 25% honeycomb infill 0…
Description This is a custom wall mount for Tineco vacuum accessories. It’s a compact bracket with two integrated hooks, designed to keep the attachments stored neatly on the wall and easy to grab. Printing Use the print settings from the…
The holders work with A10, Pure S12, and One S70 models, and probably brushes for many other Tineco models.
These are pegboard clips I designed to store attachments for the Tineco Pure S12 Plus Vacuum. I believe they will also work with Tineco's A10 and A11 series vacuums. The Tineco Pure S12 Plus comes with a multitude of accessories to cover…
My moms clip popped off her Tineco vacuum cleaner. We lost the sprint and half the clip busted. It wouldn't stay on so I designed this to keep the vacuum from seeing the landfill. Notes: I used an M3x25 screw and nut. You will need a…
Simple Roll holder for the Tineco Floor One S3 Einfacher Rollenhalter. Habe den Originalen verloren. Version für beide Seiten
Recently picked up a Tineco stick vac. I like it. It's modular and very portable. I wanted something with a hose though, so I made this adapter. Therocker can be hinged with either a paper clip or piece of filament. When I printed mine…
I recommend printing the lever in the orientation shown in the last photo to ensure that the faces that interface with the vacuum and c-clip are smooth and precise. I printed at 0.2 mm layer height up until 12 mm and then at 0.1 mm from…
