Tineco Extended Crevice Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an extended length crevice tool for the Tineco Pure One S12. (possibly others)
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 90
- Makes
- 2
- Views
- 337
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
The original concept was a crevice tool long enough to reach the bottom of the clothes dryer's lint filter slot. I found, I'm now using this more than Tineco's crevice tool for general cleaning around the house.
Printing
Printed in PLA with .4mm nozzle at .2mm layer height.
Assembly
Remove the support from the peg slot on the tool.
The latch assembly requires a retractable pen spring cut to 3/8 of an inch long.
Assemble as shown and press the assembly into position on the tool body.
(Do not glue the peg into the latch. It should move loosely and freely.)
Test fit the two parts of the tool body together. Glue them together.
I used super glue to cement the two parts of the tool together.