Counting matching models…
A small crevice tool for Dyson vacuums, V7 and later. This tool is even narrower than the stock one for reaching even smaller crevices. The design has a fully functional locking mechanism like the original, using a compliant mechanism to…
Crevice tool I made for my Festool Vacuum… lugs lock head into place with the normal twist action. Recommend printing in a hard flexible such as 95A TPU for an extremely tough part that will stand up to abuse and also not scratch/damage…
Beim Saugen im Haushalt und besonders beim Auto stößt man immer wieder auf Ritzen, die zwar voll von Dreck sind, aber auch so schmal sind, dass die üblichen Staubsaugerdüsen nichts nutzen. Hierzu habe ich diese Düsen konstruiert und mit…
I designed and printed this for my 4 gallon shop vac which had a 1 1/4in hose/nozzle (inner diameter) Print Info: No Supports No Brim (may be needed for some printers) Infill 10-20% Layer height .25mm
Crevice tool for vacuum cleaners with tube diameter d35 mm (tested on Thomson). Possible extension from 120 mm nozzle up to 280 mm. Printed with Pusament PETG. Layer height 0.3 mm should be enough since its not a mechanicaly exposed part…
Update 1.1: 17-AUG-2023 Made several small model improvements that collectively should improve the printing experience: Made the “cone” portion of the connector smoother on the outside (looks better) Eliminated the (extremely small)…
This is made for ShopVac or any other vacuum which uses a hose with an internal diameter of 1.5 inches (38 mm). I made it specifically to fit into the slots on the base of my drill press, but of course it can be used to reach other hard…
The crevice tool of the original 3in1 nozzle of my vacuum was to short and to wide to get into any crevice, so i made a new one. The openings inner diameter is 35mm, decreasing to 34mm along the way to ensure a good fit. The flattened…
🇨🇿 Prodloužená spárová hubice kompatibilní s vysavači Karcher. Ideální pro úklid úzkých a těžko dostupných míst, jako jsou mezery mezi sedačkami, rohy nebo štěrbiny. Hubice je široká pouze 1 cm, což umožňuje snadný přístup i do nejužších…
Simple but solid crevice nozzle for Karcher SE.5100 Inner Ø: 35mm Height: 200mm You can print from PLA (the walls are quite thick). Use PETG for better durability and flexibility.
A narrow (6mm wide) crevice tool for Dyson Handheld. Fits my Dyson V11, but I believe this will fit any Dyson handheld. UPDATE - 25/05/20 - new V2 STL file, with amended dimensions for the portion that plugs into the dyson. This is now a…
Printer: Prusa Mini+. Material: Prusament PETG. Layer Height: 0.2mm. Nozzle: 0.4mm. Printed with 100% infill. No supports needed. Four different models, two are thicker at the shaft for durability, and two are thinner and needs less…
Update: I created a v02 of the Crevice Tool, with a slightly greater taper to provide a better fit with the Crevice Tool Extension. If you don't need the extension, use whichever you prefer. If you wish to use this with the extension, be…
Use a brim to prevent movement while printing. 40% infill and PLA was used. It is tight fit, little sanding can be done in the inside if fit too tight.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I published an adapter to other vacuum hoses posted here before, and I wanted to…
Best printed with 3 perimeters (shells). Length ok for a smaller printer like a Prusa Mini - but can provide STL for a longer attachment if anyone wants. Prints uprights without any supports. PETG best but PLA would work too. I've even…
For when the standard crevice tool just isn't narrow enough :) Made for 35mm fitting. You might have to lower the power of the vacuum cleaner as the narrow point restricts airflow a lot.
Crevice tool for vacuum Sencor. It fits for 32mm diameter extension tubing. No support Brim/Raft if needed
This is a narrow extension for the original Dyson crevice tool. I printed it in TPU, but stiffer materials should be OK too.
I designed this to be a replacement for the Bissell Handheld Vacuum's OEM #1614210. Printed on default settings on a Bambu P1S. No supports when printing vertically, but kept the auto generated brim.
This is a remix of a design found on prusaprinters.org This extends the crevice tool into a thinner extension. I made it specifically to clean out my Roborock S7 auto empty dock. Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
Replacement Crevice Tool for Shark Lift-Away Vacuum cleaner Restore the cleaning power of your Shark Lift-Away vacuum with this durable and precise replacement crevice tool. Designed to perfectly match the dimensions of the original part,…
Thie is a replacment for the Dyson crevice nozzle that comes with nearly every Dyson vaccum cleaner. The nozzle is 200mm long. Print standing with supports on buildplate only. For every one who want to remix this or want to create any…
Crevice tools for the shark navigator that can be printed laying flat to improve print strength and stability.
Crevice nozzle for vacuum cleaner. Diameter 35mm Lenght 210mm
Extra long crevice tool I made for our Shark NV360, may fit other models or any vacuum hose with a ~39mm/1.54" ID. Collect random food particles from all the couch cushion crevices with ease. Print on the angled base, only support the…
This is a replacement crevice nozzle attachment for the Kärcher MV3/WD3 vacuum cleaner. I lost mine, so created a new one. An important note is that I only have the MV3, but as far as I know the WD3 is identical, so it should also fit on…
first design printed in prusament PLA with 15% infill used a brim and support for outer notch just to be safe
I needed a longer tool for my small vacuum to reach into the corners of my 3D Printer :) I used a customizer on Thingiverse to create this. The exact vacuum can be found on Amazon by searching "KMM Handheld Car Vacuum Cleaner, 9000Pa…
This is a simple remix of Murats great Slim Wand to reuse an old flexible crevice nozzle hose with a Dyson v11. The original had a squishy conical adapter that wouldn't fit the Dyson accessories. You can just pull the hose out of the old…
The original concept was a crevice tool long enough to reach the bottom of the clothes dryer's lint filter slot. I found, I'm now using this more than Tineco's crevice tool for general cleaning around the house. Printing Printed in PLA…
This vacuum crevice tool prints in 2 pieces. I designed it for vacuuming my dryer lint trap slot. This crevice tool fits most 1.25" vacuum hoses. Category: Household
I designed this crevice nozzle to specifically fit my RIDGID shop vacuum (model WD16400) as I could not find an exact replacement. The build is exactly 250mm tall - the limit of my printer. Please be aware of this when considering this…
This is a Crevice Adapter / Tool / Nozzle / Attachment designed for Rigid branded Shop Vacuums with 1-7/8" Hoses. It features the locking ring for when attaching to the OEM extension wand. It also fits straight into the hose via friction…
englisch This is a model for a replacement crevice tool for the Miele Complete C2 vacuum cleaner. After losing my original nozzle, I designed this model as a replacement to the official Miele crevice tool . The new nozzle allows for…
A crevice tool for your Dyson. A short (126mm total height) and a long version (216mm total height) are provided. The OnShape model is available to copy & modify over here , it's almost fully parametric using variables so you can edit…
This is a crevice tool I created for my Ryobi Shop Vac. I can only print 100mm high — so many of my models are 100mm. But I created 200mm and 300mm long STL files. Every part of the model is parameterized in OpenSCAD. By changing the…
Philips SpeedPro Max Crevice Adapter Nozzle. Just one thing for the vacuum cleaner. Crevice adapter, fits perfectly. To be printed in PLA (with 100% infil) or in PETG. PLA works as well.
Replacement Vacuum Crevice Attachment sized for the Bissel Powerforce Helix Bagless Upright Vacuum. OD: 34 mm ID: 29 mm
this is a model of crevice nozzle for karcher users i own a karcher vc 6 series vacuum. i print it on prusa mk4 with petg on 30% and it works good.
This attachment is good for cleaning stairs. It is also a crevice tool with larger coverage. Fits Dyson V10 and V11 vacuum cleaners.
This nozzle fits in your Ryobi ONE+ P7131 car vacuum and allows you to clean crevices and other hard to reach places. It's particular useful to clean between seats in your car. I use it mostly to clean filament debris inside my 3D printer…
Two version of narrow extension for DYSON V7 crevice tool. Designed to use with original crevice tool → just slide it on :)
Extension for the original "Dyson™ Light pipe crevice tool". Fits Dyson Outsize™, V11™, Dyson Cyclone V10™, Dyson V8™ and Dyson V7™ vacuums. Print Settings Printer Brand: ELEGOO Printer: ELEGOO NEPTUNE 3 Pro Rafts: Yes Supports: Yes…
Crevice tool for Kenmore Central vacuum. Inner diameter for pipe entry is 31.5mm that reduce to 30mm. It is print in PETG with 3 perimeters, 25% infill and 6 bottom layer. Tip hole of at the end of the crever is 10mm by around 28.5mm
I found the original crevice tool to be too long, so I decided to design a shorter version. I successfully designed a locking tab that prevents the attachment from slipping off.
SHARK Vac crevice tool made in PLA (eSUN) filament. I used Cura Slicer you choose your quality! Nozzle Temp: 200 Bed Temp:60 BPA (Brim) Tree Supports work fine, personal preference 60-80 mm/s on Ender 3 S1 Pro works fine.
Crevice Tool for Vacuum cleaners Siemens/Bosch. It is installed direct to the Hose 50mm (17007019 / 00574007 / 574007). Two version: Normal (250mm) and Small (180mm) for Prusa MINI or BambuLab A1 mini. It is 180mm on the photos. Printing…
A 3D printable robust, durable and efficient Crevice Weeding Hoe designed to mount to a standard threaded broomstick, extension pole or paint-stick to remove unwanted weeds from the crevices in sidewalks and driveways and any other narrow…
The crevice tool holder clips on the “stick” part of the vacuum. Print with Vertical Shells Perimeters (Wall Line Count in Cura) value of 6 to create thick, strong walls for the clip. I used generic PLA+ filament with a brim. To use, make…
Simply a Crevice Nozzle for your Miele Triflex vacuum. I suggest printing it with nozzle down, to make sure to have a clean and flat surface in the end where dust is collected, it will print just fine that way.
This is a fairly simple hose attachment for a CamVac shop vacuum, the outer diameter of the circular end is 53mm, so it should fit other shop vacs with similar / the same dimensions. It was made with a fairly narrow opening at the wide…
We have a Miele canister vacuum (S8590) with power brush (SEB236) and the extended flexible crevice tool (SFD20). Whenever you need the tool, the vacuum is here and the tool in back in the storage closet. As the small attachments are…
I needed the crevice tool to be longer but still print in 1 piece. I tilted it as much as I dared without needing supports everywhere. I did use some painted supports on the bottom to make sure it didn't fall over during printing.
Lost mine for my vaccume, designed 3d printed this up and it was a tight fit, but fit well. Designed to slide over hose.
This tool i made fits the Bosch Professional GAS 18V-10 L perfectly.
Someone have a vacuum where standard accessories doesn't fit on it. So, I design it to fit for its vacuum. It is mainly use for car cleaning. The part was print PETG with perimeters parameter set to 3 and an infill of 20%.
Remix of the vacuum tool set to make a crevice tool for a 1.75" vacuum hose. As always, included the .stp file to make your own version.
The crevice tool for our household vacuum cleaner would not fit between the slats of the heat vents used in our house. This crevice tool fits a typical home vacuum cleaner and is thin enough to fit between common heat vent slats, at least…
Print in a solid material like PLA. Print it standing up, with an outer brim. The notch on the end is to vacuum downwards better.
Nozzle can serve as a replacement for the original broken one, or as an additional thinner one. Can be used with other vacuum cleaners featuring a pipe diameter of about 34.5 mm. Print parameters: PETG plastic, 0.2 mm layer height, random…
Dyson Vacuum Small Crevice Tool to sick on the built-in dusting & crevice tool of a V15 Detect.
Opzetstukken voor de festool-stofzuiger, zo kom je ook in de kleinere kieren. Attachments for the Festool vacuum cleaner, so you can also reach into smaller cracks. Groeten Ludo
Update : I've added a v02 version of this model. The v02 version has a different taper for a more secure fit with my v02 Crevice tool, and also added a finger rest to help with the handling in general. Please be sure that you download the…
The ½ inch pex plumbing pipe is a friction fit into the 3D printed adapter. Adapter has suction bypass holes to minimize vacuum motor stall if pex pipe gets plugged. The suction tip of the pipe should also have a notch or hole to minimize…
Similar to the stub, this model is for the D20 and others like it. I printed this in PETG in speed mode 0.25 layer height on Prusa mk4s.
This is a crevice tool for standard 1¼-inch vacuum hose, specifically designed to fit in the tool compartment on a Riccar Pristine (model number STINE.6, according to the label on the bottom) canister vacuum cleaner. (My refurbished model…
Fits perfectly on the keyed tube of a Lux Royal vacuum cleaner and other cleaners with a similar profile. Print tested in ASA and ABS.
Crevice Cleaner Nozzle Can clean even the tightest crevices. Please refer to the attached image for mounting dimensions. Fits well with the Home Marble Mini Vacuum Cleaner. Please contact us for other nozzle options.
For HOTO Compressed Air Capsule
Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled. Brim : Recommended, Inside + Outside, 5mm Post Print Processing : Remove Brim Usage: Insert into the tip of the…
We had a terrible night of false smoke detections by our alarm that prompted me to design this nozzle to clean out the smoke detector sense area. Blowing out the sense area per the manufacturer instructions ( What to Do If You Have a…
Recommended print settings: Layer Height: 2mm Supports: disabled Walls: 5 Infill: 30% Gyroid Material: PLA/PETG Infill shouldn't matter too much as the model is only 1.7mm thick. I would recommend to start with PLA if you need a stronger…
A friend of mine has a Black Crevice Gstaad Ski Helmet and as he is sometimes switching the visors from orange to grey and back, these tiny white things break. I called them “Latch”, because it keeps the visor in place, but I have no idea…
I printed it so I could vacuum under the sofa. Fits the flexible crevice tool of Bosch's Unlimited 7 Vacuum Cleaner.
Dreame Z10 / Z10 Stationary Crevice Tool Release Button (Reinforced) This is a small replacement release button / lever for the slim crevice nozzle used in Dreame Z10 and Z10 Stationary vacuum cleaners. The button is responsible for…
This is a crevice tool for the K-Mart Australia ANKO 2 in 1 cordeless stick vac model number EV-PH006-W111 The included tool was kinda useless so I created one similar to the Dyson handheld nozzle. I have included a version with a heat…
Slips onto the end of the Dyson Ball crevice tool to provide suction at a right angle.
This is my version of a B&G straw tip crack and crevice tool. It utilizes common coffee straws/stirrers, you need a heat set insert m3 3X5 for the tip, and then a coffee stirrer/straw can be hand threaded from the top. depending on what…
We lost the crevice attachment for our QikCln 45Kpa cordless stick vacuum. I decided to design and print one as a replacement. This relies on a friction fit rather than the spring button on the original. It is possible that you may need…
PETG (PLA also worked fine) 0.2LH 0.4ND 30% infill Uses a ziptie tautly tied to keep in position.
The original concept was a crevice tool long enough to reach the bottom of the clothes dryer's lint filter slot. I found, I'm now using this more than Tineco's crevice tool for general cleaning around the house. Printing Printed in PLA…
🇨🇿 Prodloužená spárová hubice kompatibilní s vysavači Karcher. Ideální pro úklid úzkých a těžko dostupných míst, jako jsou mezery mezi sedačkami, rohy nebo štěrbiny. Hubice je široká pouze 1 cm, což umožňuje snadný přístup i do nejužších…
Recommended print settings: Material: PLA Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: Default as modeled. Brim : Recommended, Inside + Outside, 5mm Post Print Processing : Remove Brim Usage: Insert into the tip of the…
We had a terrible night of false smoke detections by our alarm that prompted me to design this nozzle to clean out the smoke detector sense area. Blowing out the sense area per the manufacturer instructions ( What to Do If You Have a…
Remix of the vacuum tool set to make a crevice tool for a 1.75" vacuum hose. As always, included the .stp file to make your own version.
I made this specifically for a RIGID shop vac that has the retaining hook on the hose. I've used it for numerous house projects around the house and it's held up very well.
Nozzle can serve as a replacement for the original broken one, or as an additional thinner one. Can be used with other vacuum cleaners featuring a pipe diameter of about 34.5 mm. Print parameters: PETG plastic, 0.2 mm layer height, random…
Crevice tool I made for my Festool Vacuum… lugs lock head into place with the normal twist action. Recommend printing in a hard flexible such as 95A TPU for an extremely tough part that will stand up to abuse and also not scratch/damage…
This is a simple crevice tool so your vacuum hose can get into small places. Fits standard household vacuum nozzles. Designed in OpenSCAD and printed on Prusa MK3. No supports needed.
I needed a crevice tool for the LG P9 vacuum and decided to practice modeling in Onshape! I printed it in CF-PETG standing up without supports, and it fits well to the vacuum and works just fine. I'd recommend printing in PETG or another…
Short crevice nozzle for a vacuum cleaner with a 31mm pipe connection. Simple, small print – fast and filament-efficient.
This crevice tool is 12" and is designed to be used with the adapters I created. Designed in Solidworks
My wife wanted a wall mount for the crevice tool for our Shark Vacuum (140 series). I had to sand the interior edges, but it works well for us.
Problem with layers due to using old Chinese filament. I used supports for the center part..I recommend printing slower.
I was cleaning my truck and I needed to get in between the seats and the center console. I also wanted to use my big powerful Shop-Vac but use the smaller vacuum nozzles I have for my smaller Shop-Vac and my house vacuum. I created an…
This mini crevice tool fits the common mini vacuum accessory kit. Great for cleaning and removing dust from electronics. https://www.prusaprinters.org/prints/150047-dyson-vacuum-adapter
I made this specifically for a RIGID shop vac that has the retaining hook on the hose. I've used it for numerous house projects around the house and it's held up very well.
