1 / 3
Shop Vac 2-1/2 in Crevice Nozzle — image 1
1 / 3

Shop Vac 2-1/2 in Crevice Nozzle

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Could not find this style of OEM nozzle for my 16 gallon/60 liter RIDGID Wet/Dry Shop Vacuum.

Rating
0 / 5
Likes
11
Downloads
87
Makes
0
Views
533
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution

I designed this crevice nozzle to specifically fit my RIDGID shop vacuum (model WD16400) as I could not find an exact replacement. The build is exactly 250mm tall - the limit of my printer. Please be aware of this when considering this print!

 

Print Information

  • Printed with a small brim, I thought this might be a good idea to give a bit extra bed adhesion given the height. I really didn't want to see my print fail at the very end.
  • Recommended using a lower layer height of 0.2mm for higher strength and a reasonably high infill of 50% to give this tool the best chance of living a long and sucky life!
  • This part was printed in PLA though it would likely be that much better in PETG or ABS.

 

Post-print Fitment

  • I found the fitment after printing was a bit tight. I think this may vary slightly from printer to printer and filament to filament. I am going to sand down the inside just a little bit to ensure the end seats to the lock. 

 

Tags