Super Strong Espresso Puck Screen Remover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A puck screen remover with 9 magnets and a textured grip handle
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 64
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I have printed and used other puck screen removers, but I ended up wanting something just a little bit better. There are times when the puck screen will just stick to the puck and refuse to come out, so I made a new design that takes nine magnets. In my testing, it has been able to pull the screen from the puck easily, every time.
I was inspired by the shape of this one, so I based my new design on that shape, using Shapr3d. My design takes nine 8x3mm magnets, does not have any added text embedded in it, and I also added a textured grip to the handle.
There is a built-in pause in the print profile, so you can easily insert the magnets.
There are two .3mf print profiles; one for Bambu Studio and one for Prusa Slicer. There is also an STL file if you want to import to any other slicer.
Enjoy!