1 / 2
5rd magazine CZ457 .22WMR/.17HMR — image 1
1 / 2

5rd magazine CZ457 .22WMR/.17HMR

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Model information

Category
Other Ideas
License
Creative Commons — Attribution

Zásobník pro CZ457 ráže .22WMR/.17HMR. Jsou dvě verze podložky, jedna která k uzamčení potřebuje původní kolík s pružinou a druhá která má možnost použití destičky k uzamčení. Pružinu použijte tu stejnou co využívá zásobník pro .22LR. Tištěné díly jsou použitelné s originálními. Pokud vám podavač nevyskočí do nejvyšší polohy a seká se, zpilujte trochu hrany na straně která se dotýká tiskové podložky.

Poznámky k tisku: Z materiálů co jsem zkoušel, fungoval Prusament PLA a PETG-CF, Prusament PETG nefungoval. Obecně bych doporučoval nějaký méně pružný materiál. Tisk je bez podpěr. Pro podavač použijte límec.

Magazine for CZ457 caliber .22WMR/.17HMR. There are two baseplate versions, one is locked by original pin and spring, the other has an option to use a locking plate. For spring use the same one, that .22LR magazine uses. Printed parts are usable with the original ones. If the follower doesn't jump to the upper most position and jams, file down a bit the edges on the side that touches the print plate.

Print notes: From tested materials Prusament PLA and PETG-CF worked, Prusament PETG did not work. I generally reccomend some less flexible material. Printed without supports. Use brim for the follower.

Changelog:

2. 7. 2026 Popisek pozměněn / Description modified

8. 7. 2026 Nahrán model podavače a nového těla, upraven popisek / Uploaded a follower model and a new body, description modified

12. 7. 2026 Nahrán opravený model uzamykací destičky, upraven popisek / Uploaded a fixed model of a locking plate, description modified

Tags