Search results: cz457

.22LR suppressor 1/2-20 1/2-28 Brno model 2 Cz452 Cz455 Cz457

CZ457 12-Round Mag Extension - Follower Spring Adjustment Hole

Minor remix of ShortCourse's existing model, adds a simple hole to adjust the follower spring as needed. Inspired by some commercial versions of this design. ShortCourse's existing model: https://www.thingiverse.com/thing:5400861 Print…

CZ457 synthetic cheek riser

Close your eyes, rest your head comfortably on the stock in a shooting position and open your eyes. What do you see? Are you looking directly into the scope or from below? When properly adjusted the cheek riser you should be looking…

Récupérateur de douilles pour CZ457 LRP

Récupérateur de douilles pour CZ457 LRP 2 versions, une à "cliper" dessus, et une avec ressort. Pour la version à ressort, il vous faut, donc, un petit ressort, et coller ( ou visser M2 ) les pièces, Casings recuperator for CZ 457 LRP 2…

CZ457 Pro-Varmint Cheek Riser (Boyd Stock)

Since I had medium scope rings available after grabbing my Pro Varmint I needed a little more height for a cheek weld. So I played around and designed this model. The original model “Cheek22mm” is what I went with for my comfort. In turn…

Lithgow LA101/CZ457 Single Shot Adaptor. Should work for CZ457, 455 etc

LA101, CZ457 Single Shot Mag I use for Benchrest shooting with double feed ramps to lift and align bullet into chamber minimising contact to increase accuracy. Taken from my M14 adaptor grafted onto modified CZ mag to fit the LA101 or CZ.…

Kulička natahovací páky CZ 457, Bolt knob CZ457

Kulička natahovací páky CZ 457, Bolt knob CZ457

CZ457 Bolt Knobs

Just playing around with designing various bolt knobs for my CZ457 rifle. I have confirmed the threads work but for the initial start of the threading make sure you are lined up well and it goes on straight. I printed mine using carbon…

ECI and Cold Bore Cap for CZ457 action and barrel

This is empty chamber indicator for CZ457 action and a cold bore cap for the barrel. Parts: (2) 6 x 3 mm round magnets for ECI (3) 6 x 2 mm round magnets for CAP (1) CAP (1) ECI

ECI for a CZ457 Action

This is a magnetic empty chamber indicator (ECI) for a CZ457 action. Has a hole to add a banner flag as required. Parts: (2) 6 x 3 mm round magnets (1) ECI Insert

CZ457 Single Shot Sled

I do a lot of rimfire Benchrest. I have tried several single shot sleds yet none have really produced a positive result. I came across Steve's sled and printed it out. I like how the bullet sits within the sled as well as the angle in…

CZ457 Victor Titan Cheek Rest Spacer

5/8 Cheek Rest Spacer Fits Victor Titan Universal Cheek Pieces. Made to specifically fit a CZ 457 Pro Varmint stock.

CZ457 Mag Holder for Cabinet or Safe

Nothing fancy just a CZ457 22LR Mag holder I made for my safe. Holds 7 mags total I made mine from Carbon infused PLA 3 perimeters 20% infill I attached mine with Goop glue and let it sit over night before use. I edited this model after…

LOP for CZ457 Boyd stock

In short this was designed to give me options for Length of Pull for my CZ457 Pro Varmint with the Boyds wood stock. There are 3 models, 25mm, 20mm and 15mm The fit is not perfect around the edges but I got it close. Once mounted it is…

CZ457/Bergara Bolt Handle

Made to replace the original ball on my CZ457. Have 2 designs included; preferred the beehive style pictured due to the other having some slightly sharp edges however that might be your preference.

CZ457 Empty Chamber Indicator

This is CZ457 ECI magazine block. Fit a CZ457 or 455. Use a one inch key ring to connect the banner with ECI.

CZ457 MTR Wangenauflage/Cheekrest

DE: Da ich nichts Gescheites für diesen Einsatzzweck gefunden habe, wurde der Drucker aktiviert :-) Gedruckt in TPU, dann mit Klett auf den Schaftrücken geklebt damit es leicht zum Reinigen abgenommen werden kann. Hat schon 1,5 Jahre…

CZ457 Magazin-Schuh

DE: einfacher Magazinschuh aus TPU, der über das Original-Magazin (Stahl) gestülpt werden kann um es besser greifen zu können und als Schutz. Zusätzlich kann so noch ein farbiger Akzent gesetzt werden. Je nach Passform des Magazins kann…

CZ457 6 and 12 Magazine Storage Box

By request, a collaboration with m1xstr, this is a pair of boxes for storage of CZ457, and similar, magazines. Holding either six or twelve magazines, these boxes will accommodate both 5 and 10 round magazines as well as those with…

Parts kit to adapt an airsoft L96 chassis to a CZ457

Just a little set of parts to adapt a WELL L96 airsoft chassis to a CZ457 22lr backyard popper. Instructions here: https://imgur.com/a/ja47I1v I printed these parts in nylon, but use whatever material you want. The large adapter piece…

CZ457 Stock

I'm reuploading my CZ457 stock. The stock is for CZ457 in .22WMR/.17HMR, it also fits a thick varmint barrel. Purpose of this is to have an option for a simple, cheap and reliable ergonomic stock for the CZ457 rifle. The stock has built…

CZ457 455 452 512 Magazine Box for Extended Mags (12 round) With Sliding Lid

Note: 12/13/2023 On request, added EZ fit lid versions that should require little or no edge dressing to fit. Tested one. Anyone using the EZ lid versions are welcome to leave comments so I may make further changes. 12/11/2023 Added lid…

CZ457 455 452 512 Magazine Box for Extended Mags (12 round) With Sliding Lid

Note: 12/13/2023 On request, added EZ fit lid versions that should require little or no edge dressing to fit. Tested one. Anyone using the EZ lid versions are welcome to leave comments so I may make further changes. 12/11/2023 Added lid…

CZ457 6 and 12 Magazine Storage Box

By request, a collaboration with m1xstr, this is a pair of boxes for storage of CZ457, and similar, magazines. Holding either six or twelve magazines, these boxes will accommodate both 5 and 10 round magazines as well as those with…

HSW - CZ457 Magazine Holder

ALL FUTURE MODELS WILL BE SHARED HERE: https://cults3d.com/en/users/antirice/3d-models I needed a way to hang the 5 and 10 round magazines that I have for my CZ457, so I came up with this design. So far, it works very well. BE AWARE: The…

CZ457 MTR Bagrider hinten

DE: Mich hat die hintere Riemenbügelöse immer gestört wenn man die Hand unter den Hinterschaft legt und ich wollte eine "ebenere" Auflagefläche für einen kleinen Sandsack oder Ähnliches. Schneller Druck in TPU, wird einfach mit einer…

CZ457 bolt knob

CZ 457 Bolt Knob – Smooth & Criss-Cross, Two Sizes (M6) Tired of the tiny factory bolt knob? This set of replacements gives your CZ 457 a more comfortable, confident grip — whether you're at the range or out in the field. Six variants are…

5rd magazine CZ457 .22WMR/.17HMR

Zásobník pro CZ457 ráže .22WMR/.17HMR. Jsou dvě verze podložky, jedna která k uzamčení potřebuje původní kolík s pružinou a druhá která má možnost použití destičky k uzamčení. Pružinu použijte tu stejnou co využívá zásobník pro .22LR.…

CZ457 stock

Pažba pro malorážku CZ457 v ráži .22WMR/.17HMR, sedí i pro Varmintovou hlaveň. Pažba je modelována pro tiskovou plochu tiskárny Bambulab P1C (256 mm3), nezjišťoval jsem kam všude jinde se ještě vejde, všechny potřebné podpěry jsou vidět…

Safety Flag Holder CZ457 Pro Varmint

I wanted something different when it came to safety flags and making sure that the action was cleared for RO's and others. So I made this. I based the measurements from my CZ457 Pro Varmint. With a little squeeze the holder pops into the…