Small roof with posts - for well, etc.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this for the GF's fairy garden. Originally to cover a well she made from clay, but it's handy for all sorts of…
- Rating
- 0 / 5
- Likes
- 36
- Downloads
- 87
- Makes
- 0
- Views
- 467
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution
I made this for the GF's fairy garden. Originally to cover a well she made from clay, but it's handy for all sorts of things. It can be stretched along the long axis, scaled, etc.for a variety of uses. The top edges are chamfered at 45 degrees for a clean edge.
There's two styles of roofs and supports, and two lengths of supports.
Roofs: Scalloped and not scalloped. Each with and without grooves on the bottom. The grooves are for placement of the supports - it makes assembly easier. These need supports, but I only use 10%. The grooves are only .7mm deep and fir the supports snugly.
Supports: Plain and fancy. Fancy has curved accents. Woo-hoo. Short and long. Identical, just with an extra inch on the bottom.
Print two of each and you're set. Print at .2 or finer. I used wood colored PLA and dry brushed. Assembled with CA glue.
Post-Printing
Attach supports first.
Top should match cleanly.
Category: Props