Small roof with posts - for well, etc.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this for the GF's fairy garden. Originally to cover a well she made from clay, but it's handy for all sorts of…
- Ocena
- 0 / 5
- Polubienia
- 36
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
I made this for the GF's fairy garden. Originally to cover a well she made from clay, but it's handy for all sorts of things. It can be stretched along the long axis, scaled, etc.for a variety of uses. The top edges are chamfered at 45 degrees for a clean edge.
There's two styles of roofs and supports, and two lengths of supports.
Roofs: Scalloped and not scalloped. Each with and without grooves on the bottom. The grooves are for placement of the supports - it makes assembly easier. These need supports, but I only use 10%. The grooves are only .7mm deep and fir the supports snugly.
Supports: Plain and fancy. Fancy has curved accents. Woo-hoo. Short and long. Identical, just with an extra inch on the bottom.
Print two of each and you're set. Print at .2 or finer. I used wood colored PLA and dry brushed. Assembled with CA glue.
Post-Printing
Attach supports first.
Top should match cleanly.
Category: Props