Playmobil compatiple optimised plane front landing gear
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Playmobil compatible plane front landing gear replacement part.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 1
- Views
- 104
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a optimised playmobil compatible plane front landing gear for planes with tall front landing gear. The connection that broke on the original part was reinforced and made thicker.
Printing
You can print it in many ways, but i recommend low layer hight (e.g. 0.12mm) with a 0,4mm nozzle as there are round surfaces on the z-achis which need low layer hight in order to print with good toleranzes. This model is very tolerance sensitve. I recommend printing at slow speeds to improve accuracy. If you have problems with the tolerances, try scaling the model in the slicer or edit the .step file. To improve part stability print with 8-12 walls and 4 top & bottom layers.
Note that you have to glue the two parts together after printing. This is to avoid needing supports.