Ego Power+ Dual Port Charger Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount dual charger on wall
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 25
- Makes
- 0
- Views
- 151
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a wall mount charger for Ego Power+ Dual Port charger. I didn't have a great place to set it, but had a perfect spot in my very full garage to hang it
Bottom bracket is designed to fit into the notch, ideally so the cord is hanging on the backside.
Top bracket is designed to snap onto the handle for ease of installation and secure holding.
Print settings:
Parts are designed to be printed as they come into the slicer (on their side). The overhangs are 50 degrees for sides on bracket, and 60 degrees on the sawtooth portion of lower bracket, so they should print nicely for most without any support.
Material: What ever suits your temperature environment. PETG works well in my garage even with summer heat
Layer Height: 0.2mn
Perimeters: 4
Infill: 20%
Bonus Feature: Cord can be wrapped around the 2 brackets to manage cord if your outlet is nearby