1 / 2
Ego Power+ Dual Port Charger Wall Mount — zdjęcie 1
1 / 2

Ego Power+ Dual Port Charger Wall Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount dual charger on wall

Ocena
5 / 5
Polubienia
4
Pobrania
23
Wydruki
0
Wyświetlenia
144
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a wall mount charger for Ego Power+ Dual Port charger. I didn't have a great place to set it, but had a perfect spot in my very full garage to hang it

Bottom bracket is designed to fit into the notch, ideally so the cord is hanging on the backside.
Top bracket is designed to snap onto the handle for ease of installation and secure holding.

Print settings:

Parts are designed to be printed as they come into the slicer (on their side). The overhangs are 50 degrees for sides on bracket, and 60 degrees on the sawtooth portion of lower bracket, so they should print nicely for most without any support.

Material: What ever suits your temperature environment. PETG works well in my garage even with summer heat
Layer Height: 0.2mn
Perimeters: 4
Infill: 20%

Bonus Feature: Cord can be wrapped around the 2 brackets to manage cord if your outlet is nearby

Tagi