1 / 2
Hinge for Siemens freezer - spare part
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The hinge of the hatch on my freezer was broken, so I designed a spare part.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 31
- Makes
- 0
- Views
- 299
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Hinge is printed out of PETG and do not need supports.
Assembly instruction:
- Remove the broken hinge from the flap to get a plain surface
- Allign the hing on the hatch
- Drill two bores with ⌀3,3mm and remove the burr
- Insert 2 hexagon nuts M3 to the fixing plate
- Assemble hinge and fixing plate to the hatch by using 2 countersunk screws M3x12